Installation help needed. (iPaq 3670)

Hi there. I'm trying to install Intimate on my iPaq 3670 (Familiar 0.6.1 in
flash, bootldr 2.18.54, 1Gb Microdrive, LinkSys EC2T, Compaq dual-PCMCIA
adapter) and am having some difficulties that I was hoping I could be
walked through.

I get through the install of Intimate, but when it booted I got X with no
windows, window-manager - nothing but the cursor. So, I proceeded to
"apt-get install" a bunch of packages in an attempt to get X working:
xfonts-75dpi, xbase-clients, xstroke, xkbd, rxvt-aa. "task-x" wasn't a
valid package, so I was at a bit of a loss. Anyhow, I can get a cursor,
start up an xterm from a serial console, but then the screen goes to sleep
almost immediately and I can't wake it back up.

[Note: /etc/resolv.conf had to be edited manually before I could get DNS
working, as it was linked to a non-existent file.]

So, before I go much further, I was wondering if anyone had any ideas of
what I might have done wrong, or if I've just stumbled across a hiccup in
the installation procedure.

Pasted below are the messages I get now during reboot.

Thanks for your help,

Paul.

Booting Linux image
Uncompressing Linux.................................................. done,
boot
ing the kernel.
Linux version 2.4.19-rmk6-pxa1-hh13 (root@stimpy) (gcc version 3.2.3) #4
Thu Jun
  19 23:33:30 BST 2003
CPU: StrongARM-1110 revision 8
Machine: HP iPAQ H3600
Ignoring unrecognised tag 0x5441000a
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line:
mtdpart=bootldr@0x00000000:0x00040000,root@0x00040000:0x00F
C0000 init=/linuxrc root=/dev/ram0 ramdisk_blocksize=4096 console=ttySA0
Console: colour dummy device 80x30
Calibrating delay loop... 137.21 BogoMIPS
Memory: 64MB = 64MB total
Memory: 55656KB available (1327K code, 316K data, 68K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
CPU clock: 206.400 MHz (59.000-287.000 MHz)
sa1110_clk_init: h3xxx_membank_size[0]=67108864
sa1110_clk_init: 100 MHz Samsung 8Mx16bitx4banks SDRAM
SDRAM: tck: 10 trcd: 20 trp: 20 twr: 10 refresh: 64000 cas_latency: 3
Starting kswapd
Journalled Block Device driver loaded
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis
Communications
  AB.
ttySA%d0 at MEM 0x80050000 (irq = 17) is a SA1100
Console: switching to colour frame buffer device 40x30
iPAQ H3600 keyboard driver v1.0.1
pty: 256 Unix98 ptys configured
RAMDISK driver initialized: 16 RAM disks of 8192K size 4096 blocksize
IPAQ flash: probing 32-bit flash bus, window=c48c0000 ... <7>IPAQ flash bank 1:
Found an alias at 0x1000000 for the chip at 0x0
cfi_cmdset_0001: Erase suspend on write enabled
Using buffer write method
my_sub_mtd[0]=c0f81160
found 16777216 bytes
IPAQ flash: probing 32-bit flash bus, window=c88d0000 ... <4>CFI: Found no IPAQ
flash bank 2 device at location zero
my_sub_mtd[1]=00000000
not found
Using static partition definition
Creating 3 MTD partitions on "IPAQ flash bank 1":
0x00000000-0x00040000 : "H3XXX boot firmware"
mtd: Giving out device 0 to H3XXX boot firmware
0x00040000-0x00fc0000 : "H3XXX root jffs2"
mtd: Giving out device 1 to H3XXX root jffs2
0x00fc0000-0x01000000 : "asset"
mtd: Giving out device 2 to asset
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
IPv4 over IPv4 tunneling driver
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 7414K
VFS: Mounted root (cramfs filesystem).
Mounted devfs on /dev
Freeing init memory: 68K
Setting up RAMFS, please wait...
depmod: /lib/modules/2.4.19-rmk6-pxa1-hh13/modules.ieee1394map is not an
ELF fil
e
depmod: error reading ELF header
/lib/modules/2.4.19-rmk6-pxa1-hh13/modules.pnpb
iosmap: No such file or directory
Using /lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/drivers/mmc/mmc_base.o

Using
/lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/arch/arm/mach-sa1100/h3600_hal.o
H3600 Registering HAL abstraction layer
Using
/lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/arch/arm/mach-sa1100/h3600_micro
.o
h3600_micro_setup: setting up microcontroller interface
Using /lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/drivers/serial/serial_h3800.o
Using
/lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/arch/arm/mach-sa1100/h3600_asic.
o
h3600_asic_init: unknown iPAQ model 3600
insmod: init_module: h3600_asic: No such device
Using
/lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/arch/arm/mach-sa1100/h3600_hal.o
insmod: A module named h3600_hal already exists
Using /lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/drivers/char/h3600_ts.o
h3600_ts_init_module: registering char device
Using /lib/modules/2.4.19-rmk6-pxa1-hh13/pcmcia/pcmcia_core.o
Linux Kernel Card Services 3.1.22
   options: [pm]
Using
/lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/arch/arm/mach-sa1100/h3600-sleev
e.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh13/pcmcia/sa1100_cs.o
<6>SA-1100 PCMCIA (CS release 3.1.22)
installing h3600_pcmcia_ops
sa1100_pcmcia_driver_init: pcmcia_low_level=cc9528c0
sa1100_pcmcia_driver_init: skt=0 skt->virt_io=cc960000
sa1100_pcmcia_driver_init: skt=1 skt->virt_io=cc980000
sa1100_pcmcia_driver_init: done
Using /lib/modules/2.4.19-rmk6-pxa1-hh13/pcmcia/ds.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/drivers/char/serial.o
Serial driver version 5.05c (2001-07-08) with no serial options enabled
Using /lib/modules/2.4.19-rmk6-pxa1-hh13/pcmcia/h3600_generic_sleeve.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/drivers/ide/ide-mod.o
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Using /lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/drivers/ide/ide-disk.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/drivers/ide/ide-probe-mod.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/drivers/ide/ide-cs.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/drivers/net/wireless/hermes.o
Using /lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/drivers/net/wireless/orinoco.o
Using
/lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/drivers/net/wireless/orinoco_cs.
o
Using
/lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/arch/arm/mach-sa1100/sa1100usb_c
ore.o
SA1100 USB Controller Core Initialized
Using /lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/arch/arm/mach-sa1100/usb-eth.o
usbctl: Opened for usb-eth
usbctl: Started for usb-eth
Using /lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/drivers/char/sa1100-rtc.o
SA1100 Real Time Clock driver v1.03
Setting up some devices
Waiting 10 secs for cards to configure
cardmgr[66]: starting, version is 3.1.22
cardmgr[66]: watching 2 sockets
cardmgr[66]: socket 0: ATA/IDE Fixed Disk
Trying to free nonexistent resource <cc960000-cc96000f>
hda: IBM-DSCM-11000, ATA DISK drive
ide0 at 0xcc960000-0xcc960007,0xcc96000e on irq 42
hda: 2104704 sectors (1078 MB) w/60KiB Cache, CHS=2088/16/63
Partition check:
  /dev/ide/host0/bus0/target0/lun0: p1 p2
ide_cs: hda: Vcc = 3.3, Vpp = 0.0
cardmgr[66]: executing: './ide start hda'
cardmgr[66]: + IDE Init
cardmgr[66]: socket 1: NE2000 Compatible Ethernet
cardmgr[66]: executing: 'modprobe 8390'
cardmgr[66]: + Using
/lib/modules/2.4.19-rmk6-pxa1-hh13/kernel/drivers/net/8390.
o
cardmgr[66]: executing: 'modprobe pcnet_cs'
cardmgr[66]: + Using /lib/modules/2.4.19-rmk6-pxa1-hh13/pcmcia/pcnet_cs.o
eth0: NE2000 Compatible: io 0xcc980300, irq 32, hw_addr 00:E0:98:00:90:57
cardmgr[66]: executing: './network start eth0'
cardmgr[66]: + deleting routers
cardmgr[66]: + SIOCDELRT: No such process
cardmgr[66]: + adding dns xxx.xxx.xxx.xxx
cardmgr[66]: + adding dns xxx.xxx.xxx.xxx
cardmgr[66]: + info, udhcp client (v0.9.6) started
cardmgr[66]: + debug, Sending discover...
cardmgr[66]: + debug, Sending select for xxx.xxx.xxx.xxx...
cardmgr[66]: + info, Lease of xxx.xxx.xxx.xxx obtained, lease time 604800
cardmgr[66]: exiting
  /dev/ide/host0/bus0/target0/lun0: p1 p2
  /dev/ide/host0/bus0/target0/lun0: p1 p2
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Booting intimate from microdrive...
Executing /sbin/init...
INIT: version 2.84 booting
Activating swap.
Checking root file system...
fsck 1.27 (8-Mar-2002)
/dev/discs/disc0/part2: clean, 11142/130304 files, 54142/260442 blocks
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal
System time was Tue Aug 5 14:50:50 UTC 2003.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. System local time is now Tue Aug 5 14:50:52 UTC 2003.
Calculating module dependencies... done.
Loading modules:
Checking all file systems...
fsck 1.27 (8-Mar-2002)
Setting kernel variables.
Loading the saved-state of the serial devices...
Illegal UART type: undefined/dev/ttySA0 at 0x0000 (irq = 17) is a undefined
Mounting local filesystems...
/dev/discs/disc0/part1 on /mnt/dos type vfat mtdblock_open
(rw)
ok
Eep. Child "libc6.list" (ino #1573) of dir ino #196 doesn't exist!
JFFS2 mount took 21 jiffies
/dev/mtdblock/1 on /mnt/flash type jffs2 (rw)
tmpfs on /dev/shm type tmpfs (rw)
Running 0dns-down to make sure resolv.conf is ok...done.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces: done.
R
Setting the System Clock using the Hardware Clock as reference...
System Clock set. Local time: Tue Aug 5 14:51:08 UTC 2003

Cleaning: /tmp /var/lock /var/run.
Initializing random number generator... done.
Recovering nvi editor sessions... done.
INIT: Entering runlevel: 2
Starting internet superserver: inetd.
swapd 0.2 (May 21, 2000), copyright Neven Lovric <nlovric@linux.hr>
Adding Swap: 4088k swap-space (priority -1)
Adding Swap: 4088k swap-space (priority -2)
Adding Swap: 4088k swap-space (priority -3)
Adding Swap: 4088k swap-space (priority -4)
swapd: 4 swap files (16384kb total) found and reused.
Starting deferred execution scheduler: atd.
Starting periodic command scheduler: cron.
Starting X...
Could not init font path element /usr/X11R6/lib/X11/fonts/100dpi/, removing
from
  list!
/etc/rc2.d/S99x: /etc/X11/Xdefaults: No such file or directory

Debian GNU/Linux 3.0 intimate ttySA0

intimate login:
Received on Fri Aug 08 18:17:47 2003