intimate-request@handhelds.org wrote:
>Send Intimate mailing list submissions to
> intimate@handhelds.org
>
>To subscribe or unsubscribe via the World Wide Web, visit
> http://handhelds.org/mailman/listinfo/intimate
>or, via email, send a message with subject or body 'help' to
> intimate-request@handhelds.org
>
>You can reach the person managing the list at
> intimate-admin@handhelds.org
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of Intimate digest..."
>
>
>Today's Topics:
>
> 1. (no subject) (intimate@dgilbert.plus.com)
> 2. (no subject) (intimate@dgilbert.plus.com)
> 3. Further (intimate@dgilbert.plus.com)
>
>--__--__--
>
>Message: 1
>Date: 8 Jan 2003 15:29:02 -0000
>To: intimate@handhelds.org
>From: intimate@dgilbert.plus.com
>Reply-To: intimate@dgilbert.plus.com
>CC:
>Subject: [Intimate] (no subject)
>
>
> Setup
>Installation onto a iPAQ 3870 with IBM Microdrive 1Gb installed in dual slot PCMCIA expansion slot. Serial terminal to win2k box, USB network to Linux box connected to ADSL via DHCP serving router.
>
> Situation
>I have successfully installed bootloader 2.18.54 and familiar 0.61 successfully, and then ran the script as per the website. BTW maybe add in that you need to run "ipkg update" before trying initimate from familiar as mkreiser is not in the ipkg list.
>
>Ran the install script and set the Microdrive as follows (IT is not mouted at this point):
>
>Part 1 970Mb Type 83
>Part 2 31Mb Type 82
>
>The script ran fine at this point mounting the drive, but then failed after the reboot. I have acepted the default settings and it still does not work.
>
>After this failed, I tried using the method described in the how-to pdf (i.e. copying zimage, initrd and params to the microdrive setup like so:
>
>part 1 10Mb Type 6 Fat16
>part 2 The rest Type 82 Linux
>)
>
>unmounted the drive and then rebooted.
>
>It seemed to try and start and then it say that it can not find the boot image. Either it has nt mouned the microdrive properly or there is something else happening.
>
>What does this sound like to other people?
>
>
>--__--__--
>
>Message: 2
>Date: 8 Jan 2003 15:37:35 -0000
>To: intimate@handhelds.org
>From: intimate@dgilbert.plus.com
>Reply-To: intimate@dgilbert.plus.com
>CC:
>Subject: [Intimate] (no subject)
>
>
>Further to the previous message, the following is the serial output after package download:
>
>Fetched 30.1MB in 19m53s (25.2kB/s)
>debconf: delaying package configuration, since apt-utils is not installed
>Selecting previously deselected package imlib-base.
>(Reading database ... 5032 files and directories currently installed.)
>Unpacking imlib-base (from .../imlib-base_1.9.14-6_all.deb) ...
>Selecting previously deselected package libgtk1.2-common.
>Unpacking libgtk1.2-common (from .../libgtk1.2-common_1.2.10-14_all.deb) ...
>Selecting previously deselected package libglib1.2.
>Unpacking libglib1.2 (from .../libglib1.2_1.2.10-6_arm.deb) ...
>Selecting previously deselected package xfree86-common.
>Unpacking xfree86-common (from .../xfree86-common_4.2.1-3_all.deb) ...
>Selecting previously deselected package libfreetype6.
>Unpacking libfreetype6 (from .../libfreetype6_2.1.2-9_arm.deb) ...
>Selecting previously deselected package xlibs.
>Unpacking xlibs (from .../archives/xlibs_4.2.1-3_arm.deb) ...
>Selecting previously deselected package libgtk1.2.
>Unpacking libgtk1.2 (from .../libgtk1.2_1.2.10-14_arm.deb) ...
>Selecting previously deselected package xaw3dg.
>Unpacking xaw3dg (from .../archives/xaw3dg_1.5-14_arm.deb) ...
>Selecting previously deselected package powermgmt-base.
>Unpacking powermgmt-base (from .../powermgmt-base_100_arm.deb) ...
>Selecting previously deselected package libssl0.9.6.
>Unpacking libssl0.9.6 (from .../libssl0.9.6_0.9.6g-6_arm.deb) ...
>Selecting previously deselected package zlib1g.
>Unpacking zlib1g (from .../zlib1g_1%3a1.1.4-6_arm.deb) ...
>Selecting previously deselected package python2.2.
>Unpacking python2.2 (from .../python2.2_2.2.1-6_arm.deb) ...
>Selecting previously deselected package tcl8.0.
>Unpacking tcl8.0 (from .../tcl8.0_8.0.5-7_arm.deb) ...
>Selecting previously deselected package tcl8.3.
>Unpacking tcl8.3 (from .../tcl8.3_8.3.3-8_arm.deb) ...
>Selecting previously deselected package blt-common.
>Unpacking blt-common (from .../blt-common_2.4y-1_arm.deb) ...
>Selecting previously deselected package blt.
>Unpacking blt (from .../archives/blt_2.4y-1_arm.deb) ...
>Selecting previously deselected package tk8.3.
>Unpacking tk8.3 (from .../archives/tk8.3_8.3.3-9_arm.deb) ...
>Selecting previously deselected package tix41.
>Unpacking tix41 (from .../tix41_4.1.0.7-4.1_arm.deb) ...
>Selecting previously deselected package python2.2-tk.
>Unpacking python2.2-tk (from .../python2.2-tk_2.2.1-6_arm.deb) ...
>Selecting previously deselected package python2.
>Unpacking python2 (from .../archives/python2_100_arm.deb) ...
>Selecting previously deselected package binutils.
>Unpacking binutils (from .../binutils_2.13.90.0.10-1_arm.deb) ...
>Selecting previously deselected package cpp-2.95.
>(Reading database ... 6958 files and directories currently installed.)
>Unpacking cpp-2.95 (from .../cpp-2.95_1%3a2.95.4-11_arm.deb) ...
>Selecting previously deselected package cpp.
>Unpacking cpp (from .../cpp_2%3a2.95.4-17_arm.deb) ...
>Selecting previously deselected package cpu-scale.
>Unpacking cpu-scale (from .../archives/cpu-scale_0.1_arm.deb) ...
>Selecting previously deselected package file.
>Unpacking file (from .../archives/file_3.39-1_arm.deb) ...
>Selecting previously deselected package gcc-2.95.
>Unpacking gcc-2.95 (from .../gcc-2.95_1%3a2.95.4-11_arm.deb) ...
>Selecting previously deselected package gcc.
>Unpacking gcc (from .../gcc_2%3a2.95.4-17_arm.deb) ...
>Selecting previously deselected package h3600-utils.
>Unpacking h3600-utils (from .../h3600-utils_0.4-1_arm.deb) ...
>Selecting previously deselected package less.
>Unpacking less (from .../archives/less_378-2_arm.deb) ...
>Selecting previously deselected package libc6-dev.
>Unpacking libc6-dev (from .../libc6-dev_2.2.5-14.3_arm.deb) ...
>Selecting previously deselected package libpng2.
>Unpacking libpng2 (from .../libpng2_1.0.12-6_arm.deb) ...
>Selecting previously deselected package make.
>Unpacking make (from .../make_3.79.1-15_arm.deb) ...
>Selecting previously deselected package perl-modules.
>Unpacking perl-modules (from .../perl-modules_5.6.1-8.2_all.deb) ...
>Selecting previously deselected package perl.
>Unpacking perl (from .../perl_5.6.1-8.2_arm.deb) ...
>Selecting previously deselected package ssh.
>Unpacking ssh (from .../ssh_1%3a3.4p1-4_arm.deb) ...
>Selecting previously deselected package strace.
>Unpacking strace (from .../strace_4.4-1.2_arm.deb) ...
>Selecting previously deselected package libxaw6.
>Unpacking libxaw6 (from .../libxaw6_4.2.1-3_arm.deb) ...
>Selecting previously deselected package xlib6g.
>Unpacking xlib6g (from .../xlib6g_4.2.1-3_all.deb) ...
>Selecting previously deselected package blackbox-ipaq.
>Unpacking blackbox-ipaq (from .../blackbox-ipaq_0.61.1-4_arm.deb) ...
>Selecting previously deselected package libjpeg62.
>Unpacking libjpeg62 (from .../libjpeg62_6b-6_arm.deb) ...
>Selecting previously deselected package libtiff3g.
>Unpacking libtiff3g (from .../libtiff3g_3.5.5-6_arm.deb) ...
>Selecting previously deselected package libungif4g.
>Unpacking libungif4g (from .../libungif4g_4.1.0b1-3_arm.deb) ...
>Selecting previously deselected package gdk-imlib1.
>(Reading database ... 9595 files and directories currently installed.)
>Unpacking gdk-imlib1 (from .../gdk-imlib1_1.9.14-11_arm.deb) ...
>Selecting previously deselected package libart2.
>Unpacking libart2 (from .../libart2_1.4.2-8_arm.deb) ...
>Selecting previously deselected package libaudiofile0.
>Unpacking libaudiofile0 (from .../libaudiofile0_0.2.3-4_arm.deb) ...
>Selecting previously deselected package esound-common.
>Unpacking esound-common (from .../esound-common_0.2.23-3_all.deb) ...
>Selecting previously deselected package libesd0.
>Unpacking libesd0 (from .../libesd0_0.2.23-3_arm.deb) ...
>Selecting previously deselected package libgnomesupport0.
>Unpacking libgnomesupport0 (from .../libgnomesupport0_1.4.2-8_arm.deb) ...
>Selecting previously deselected package libgnomeui32.
>Unpacking libgnomeui32 (from .../libgnomeui32_1.4.2-8_arm.deb) ...
>Selecting previously deselected package liborbit0.
>Unpacking liborbit0 (from .../liborbit0_0.5.16-1_arm.deb) ...
>Selecting previously deselected package libgnorba27.
>Unpacking libgnorba27 (from .../libgnorba27_1.4.2-8_arm.deb) ...
>Selecting previously deselected package libgnorbagtk0.
>Unpacking libgnorbagtk0 (from .../libgnorbagtk0_1.4.2-8_arm.deb) ...
>Selecting previously deselected package gnome-bin.
>Unpacking gnome-bin (from .../gnome-bin_1.4.2-8_arm.deb) ...
>Selecting previously deselected package gnome-libs-data.
>Unpacking gnome-libs-data (from .../gnome-libs-data_1.4.2-8_all.deb) ...
>Selecting previously deselected package libgnome32.
>Unpacking libgnome32 (from .../libgnome32_1.4.2-8_arm.deb) ...
>Selecting previously deselected package libgtop1.
>Unpacking libgtop1 (from .../libgtop1_1.0.13-3_arm.deb) ...
>Selecting previously deselected package libpanel-applet0.
>Unpacking libpanel-applet0 (from .../libpanel-applet0_1.4.2-1_arm.deb) ...
>Selecting previously deselected package bubblemon.
>Unpacking bubblemon (from .../bubblemon_1.2.8-1_arm.deb) ...
>Selecting previously deselected package libbz2-1.0.
>Unpacking libbz2-1.0 (from .../libbz2-1.0_1.0.2-1_arm.deb) ...
>Selecting previously deselected package bzip2.
>Unpacking bzip2 (from .../archives/bzip2_1.0.2-1_arm.deb) ...
>Selecting previously deselected package dialog.
>Unpacking dialog (from .../dialog_0.9b-20020814-1_arm.deb) ...
>Selecting previously deselected package defoma.
>Unpacking defoma (from .../archives/defoma_0.11.1_all.deb) ...
>Selecting previously deselected package gtktetris.
>(Reading database ... 10216 files and directories currently installed.)
>Unpacking gtktetris (from .../gtktetris_0.5-3_arm.deb) ...
>Selecting previously deselected package libapm1.
>Unpacking libapm1 (from .../libapm1_3.0.2-6_arm.deb) ...
>Selecting previously deselected package libxml1.
>Unpacking libxml1 (from .../libxml1_1%3a1.8.17-2_arm.deb) ...
>Selecting previously deselected package libglade0.
>Unpacking libglade0 (from .../libglade0_1%3a0.17-2.7_arm.deb) ...
>Selecting previously deselected package libid3tag0.
>Unpacking libid3tag0 (from .../libid3tag0_0.14.2b-4_arm.deb) ...
>Selecting previously deselected package libmad0.
>Unpacking libmad0 (from .../libmad0_0.14.2b-4_arm.deb) ...
>Selecting previously deselected package libncurses5-dev.
>Unpacking libncurses5-dev (from .../libncurses5-dev_5.2.20020112a-8_arm.deb) ...
>
>Selecting previously deselected package madplay.
>Unpacking madplay (from .../madplay_0.14.2b-4_arm.deb) ...
>Selecting previously deselected package menu.
>Unpacking menu (from .../archives/menu_2.1.5-14_arm.deb) ...
>Selecting previously deselected package pygtk-familiar.
>Unpacking pygtk-familiar (from .../pygtk-familiar_0.6.8-2_arm.deb) ...
>Selecting previously deselected package mingle.
>Unpacking mingle (from .../archives/mingle_0.1-4_arm.deb) ...
>Selecting previously deselected package ncftp.
>Unpacking ncftp (from .../ncftp_2%3a3.1.5-1_arm.deb) ...
>Selecting previously deselected package ntpdate.
>Unpacking ntpdate (from .../ntpdate_1%3a4.1.0-8_arm.deb) ...
>Selecting previously deselected package rxvt.
>Unpacking rxvt (from .../rxvt_1%3a2.6.4-6_arm.deb) ...
>Selecting previously deselected package wget.
>Unpacking wget (from .../archives/wget_1.8.2-5_arm.deb) ...
>tar: ./control: time stamp 2003-08-20 09:58:48 is 19330409 s in the future
>Selecting previously deselected package wmmp3.
>Unpacking wmmp3 (from .../archives/wmmp3_0.12-3_arm.deb) ...
>Selecting previously deselected package wmrecord.
>Unpacking wmrecord (from .../wmrecord_1.0.5-1_arm.deb) ...
>tar: ./control: time stamp 2008-01-11 01:02:39 is 157973837 s in the future
>tar: ./postrm: time stamp 2008-01-11 01:12:14 is 157974412 s in the future
>Selecting previously deselected package wmsmixer.
>Unpacking wmsmixer (from .../archives/wmsmixer_0.5_arm.deb) ...
>Selecting previously deselected package xcalibrate.
>Unpacking xcalibrate (from .../xcalibrate_0.0-1_arm.deb) ...
>Selecting previously deselected package xutils.
>Unpacking xutils (from .../xutils_4.2.1-3_arm.deb) ...
>Selecting previously deselected package xfonts-itsy.
>Unpacking xfonts-itsy (from .../xfonts-itsy_0.01_all.deb) ...
>Selecting previously deselected package xfonts-scalable-nonfree.
>(Reading database ... 11569 files and directories currently installed.)
>Unpacking xfonts-scalable-nonfree (from .../xfonts-scalable-nonfree_4.2.0-2_all.
>deb) ...
>Selecting previously deselected package xfonts-ttf.
>Unpacking xfonts-ttf (from .../xfonts-ttf_0.0-1_all.deb) ...
>tar: ./control: time stamp 2021-10-03 10:56:10 is 591215426 s in the future
>Selecting previously deselected package xserver-tiny-h3600.
>Unpacking xserver-tiny-h3600 (from .../xserver-tiny-h3600_4.1.0-5_arm.deb) ...
>Selecting previously deselected package xstroke.
>Unpacking xstroke (from .../archives/xstroke_0.3-1_arm.deb) ...
>Selecting previously deselected package xvkbd.
>Unpacking xvkbd (from .../archives/xvkbd_2.4-1_arm.deb) ...
>Selecting previously deselected package wmapm.
>Unpacking wmapm (from .../archives/wmapm_3.1.0-7_arm.deb) ...
>Setting up imlib-base (1.9.14-6) ...
>
>Setting up libgtk1.2-common (1.2.10-14) ...
>Setting up libglib1.2 (1.2.10-6) ...
>
>Setting up xfree86-common (4.2.1-3) ...
>
>Setting up libfreetype6 (2.1.2-9) ...
>
>Setting up xlibs (4.2.1-3) ...
>
>Setting up libgtk1.2 (1.2.10-14) ...
>
>Setting up xaw3dg (1.5-14) ...
>
>Setting up powermgmt-base (100) ...
>Setting up libssl0.9.6 (0.9.6g-6) ...
>
>Setting up zlib1g (1.1.4-6) ...
>
>Setting up python2.2 (2.2.1-6) ...
>/var/lib/dpkg/info/python2.2.postinst: line 50: 4031 Segmentation fault up
>date-menus
>dpkg: error processing python2.2 (--configure):
> subprocess post-installation script returned error exit status 139
>Setting up tcl8.0 (8.0.5-7) ...
>/var/lib/dpkg/info/tcl8.0.postinst: line 12: 4035 Segmentation fault updat
>e-menus
>dpkg: error processing tcl8.0 (--configure):
> subprocess post-installation script returned error exit status 139
>Setting up tcl8.3 (8.3.3-8) ...
>/var/lib/dpkg/info/tcl8.3.postinst: line 12: 4039 Segmentation fault updat
>e-menus
>dpkg: error processing tcl8.3 (--configure):
> subprocess post-installation script returned error exit status 139
>Setting up blt-common (2.4y-1) ...
>
>dpkg: dependency problems prevent configuration of blt:
> blt depends on tcl8.0 (>= 8.0.4) | tcl8.2 (>= 8.2.2) | tcl8.3 (>= 8.3.0); howev
>er:
> Package tcl8.0 is not configured yet.
> Package tcl8.2 is not installed.
> Package tcl8.3 is not configured yet.
>dpkg: error processing blt (--configure):
> dependency problems - leaving unconfigured
>dpkg: dependency problems prevent configuration of tk8.3:
> tk8.3 depends on tcl8.3 (>= 8.3.0); however:
> Package tcl8.3 is not configured yet.
>dpkg: error processing tk8.3 (--configure):
> dependency problems - leaving unconfigured
>dpkg: dependency problems prevent configuration of tix41:
> tix41 depends on tcl8.3 (>= 8.3.2); however:
> Package tcl8.3 is not configured yet.
> tix41 depends on tk8.3 (>= 8.3.0); however:
> Package tk8.3 is not configured yet.
>dpkg: error processing tix41 (--configure):
> dependency problems - leaving unconfigured
>dpkg: dependency problems prevent configuration of python2.2-tk:
> python2.2-tk depends on python2.2 (= 2.2.1-6); however:
> Package python2.2 is not configured yet.
> python2.2-tk depends on blt (>= 2.4u-1); however:
> Package blt is not configured yet.
> python2.2-tk depends on tcl8.3 (>= 8.3.0); however:
> Package tcl8.3 is not configured yet.
> python2.2-tk depends on tix41 (>= 4.1.0.7-4); however:
> Package tix41 is not configured yet.
> python2.2-tk depends on tk8.3 (>= 8.3.0); however:
> Package tk8.3 is not configured yet.
>dpkg: error processing python2.2-tk (--configure):
> dependency problems - leaving unconfigured
>dpkg: dependency problems prevent configuration of python2:
> python2 depends on python2.2; however:
> Package python2.2 is not configured yet.
> python2 depends on python2.2-tk; however:
> Package python2.2-tk is not configured yet.
>dpkg: error processing python2 (--configure):
> dependency problems - leaving unconfigured
>Setting up binutils (2.13.90.0.10-1) ...
>
>Setting up cpu-scale (0.1) ...
>/var/lib/dpkg/info/cpu-scale.postinst: line 3: 4052 Segmentation fault upd
>ate-menus
>dpkg: error processing cpu-scale (--configure):
> subprocess post-installation script returned error exit status 139
>Setting up file (3.39-1) ...
>Setting up h3600-utils (0.4-1) ...
>/var/lib/dpkg/info/h3600-utils.postinst: line 3: 4054 Segmentation fault u
>pdate-menus
>dpkg: error processing h3600-utils (--configure):
> subprocess post-installation script returned error exit status 139
>Setting up less (378-2) ...
>
>Setting up libc6-dev (2.2.5-14.3) ...
>
>Setting up libpng2 (1.0.12-6) ...
>
>Setting up make (3.79.1-15) ...
>
>Setting up ssh (3.4p1-4) ...
>Creating SSH2 RSA key
>Creating SSH2 DSA key
>Restarting OpenBSD Secure Shell server: sshd.
>
>Setting up strace (4.4-1.2) ...
>
>Setting up libxaw6 (4.2.1-3) ...
>
>Setting up xlib6g (4.2.1-3) ...
>Setting up blackbox-ipaq (0.61.1-4) ...
>/usr/sbin/wm-menu-config: line 15: 4134 Segmentation fault update-menus
>dpkg: error processing blackbox-ipaq (--configure):
> subprocess post-installation script returned error exit status 139
>Setting up libjpeg62 (6b-6) ...
>
>Setting up libtiff3g (3.5.5-6) ...
>
>Setting up libungif4g (4.1.0b1-3) ...
>
>Setting up gdk-imlib1 (1.9.14-11) ...
>
>Setting up libart2 (1.4.2-8) ...
>
>Setting up libaudiofile0 (0.2.3-4) ...
>
>Setting up esound-common (0.2.23-3) ...
>
>Setting up libesd0 (0.2.23-3) ...
>
>Setting up libgnorbagtk0 (1.4.2-8) ...
>
>Setting up libgtop1 (1.0.13-3) ...
>
>Setting up libbz2-1.0 (1.0.2-1) ...
>
>Setting up bzip2 (1.0.2-1) ...
>
>Setting up dialog (0.9b-20020814-1) ...
>Setting up gtktetris (0.5-3) ...
>/var/lib/dpkg/info/gtktetris.postinst: line 3: 4178 Segmentation fault upd
>ate-menus
>dpkg: error processing gtktetris (--configure):
> subprocess post-installation script returned error exit status 139
>Setting up libapm1 (3.0.2-6) ...
>
>Setting up libxml1 (1.8.17-2) ...
>
>Setting up libglade0 (0.17-2.7) ...
>
>Setting up libid3tag0 (0.14.2b-4) ...
>
>Setting up libmad0 (0.14.2b-4) ...
>
>Setting up libncurses5-dev (5.2.20020112a-8) ...
>
>Setting up madplay (0.14.2b-4) ...
>Setting up menu (2.1.5-14) ...
>
>dpkg: dependency problems prevent configuration of pygtk-familiar:
> pygtk-familiar depends on python2; however:
> Package python2 is not configured yet.
>dpkg: error processing pygtk-familiar (--configure):
> dependency problems - leaving unconfigured
>dpkg: dependency problems prevent configuration of mingle:
> mingle depends on python2; however:
> Package python2 is not configured yet.
> mingle depends on pygtk-familiar; however:
> Package pygtk-familiar is not configured yet.
>dpkg: error processing mingle (--configure):
> dependency problems - leaving unconfigured
>Setting up ncftp (3.1.5-1) ...
>
>Setting up ntpdate (4.1.0-8) ...
>
>Setting up rxvt (2.6.4-6) ...
>
>Setting up wget (1.8.2-5) ...
>
>Setting up wmmp3 (0.12-3) ...
>
>Setting up wmrecord (1.0.5-1) ...
>
>Setting up wmsmixer (0.5) ...
>
>Setting up xcalibrate (0.0-1) ...
>
>Setting up xutils (4.2.1-3) ...
>
>Setting up xfonts-itsy (0.01) ...
>Running update-fonts-dir in misc font directory.../usr/sbin/update-fonts-dir: wa
>rning: absolute path /usr/lib/X11/fonts/misc was provided.
>done.
>Running update-fonts-alias in misc font directory.../usr/sbin/update-fonts-alias
>: warning: absolute path /usr/lib/X11/fonts/misc was provided.
>done.
>
>Setting up xfonts-ttf (0.0-1) ...
>dpkg: dependency problems prevent configuration of xserver-tiny-h3600:
> xserver-tiny-h3600 depends on h3600-utils; however:
> Package h3600-utils is not configured yet.
>dpkg: error processing xserver-tiny-h3600 (--configure):
> dependency problems - leaving unconfigured
>Setting up xstroke (0.3-1) ...
>
>Setting up xvkbd (2.4-1) ...
>Setting up wmapm (3.1.0-7) ...
>
>Setting up perl-modules (5.6.1-8.2) ...
>
>Setting up cpp (2.95.4-17) ...
>Setting up cpp-2.95 (2.95.4-11) ...
>
>Setting up gcc (2.95.4-17) ...
>
>Setting up gcc-2.95 (2.95.4-11) ...
>
>Setting up perl (5.6.1-8.2) ...
>
>Setting up liborbit0 (0.5.16-1) ...
>
>Setting up gnome-bin (1.4.2-8) ...
>Setting up gnome-libs-data (1.4.2-8) ...
>
>Setting up libgnomesupport0 (1.4.2-8) ...
>
>Setting up libpanel-applet0 (1.4.2-1) ...
>
>Setting up defoma (0.11.1) ...
>
>Setting up xfonts-scalable-nonfree (4.2.0-2) ...
>
>Setting up libgnome32 (1.4.2-8) ...
>
>Setting up libgnomeui32 (1.4.2-8) ...
>
>Setting up libgnorba27 (1.4.2-8) ...
>
>Setting up bubblemon (1.2.8-1) ...
>Errors were encountered while processing:
> python2.2
> tcl8.0
> tcl8.3
> blt
> tk8.3
> tix41
> python2.2-tk
> python2
> cpu-scale
> h3600-utils
> blackbox-ipaq
> gtktetris
> pygtk-familiar
> mingle
> xserver-tiny-h3600
>E: Sub-process /usr/bin/dpkg returned an error code (1)
>
>Finished installing .debs...
>
>
>OK.. onto the final stage..
>This is where we install the intimateboot package and set your bootparams correc
>tly
>
>Would you like to install the intimateboot package? [y/n]?
>
>--__--__--
>
>Message: 3
>Date: 8 Jan 2003 15:40:43 -0000
>To: intimate@handhelds.org
>From: intimate@dgilbert.plus.com
>Reply-To: intimate@dgilbert.plus.com
>CC:
>Subject: [Intimate] Further
>
>
>
>Following reboot I get the following messages:
>
>/mnt/ramfs/tmp/intimate # reboot
>
>Broadcast message from root (ttySA0) Wed Jan 8 15:38:35 2003...
>
>The system is going down for reboot NOW !!
>INIT: Switching to runlevel: 6
>INIT: Sending processes the TERM signal
>INIT: Sending processes the ūSaving the System Clock time to the Hardware Clock.
>..
>1
>2
>cardmgr[250]: executing: './ide check hda'
>cardmgr[250]: executing: './ide stop hda'
>cardmgr[250]: + umount: /dev/hda1: Device or resource busy
>cardmgr[250]: stop cmd exited with status 1
>cardmgr[250]: executing: 'modprobe -r ide-cs'
>cardmgr[250]: exiting
>Deactivating swap... done.
>Unmounting local filesystems... umount: forced umount of none failed!
>done.
>Rebooting... Uncompressing Linux............................................. do
>ne, booting the kernel.
>Linux version 2.4.18-rmk3 (andyc@rockhopper.crl.dec.com) (gcc version 2.95.2 199
>91024 (release)) #1 Tue Oct 15 14:38:20 EDT 2002
>Processor: Intel StrongARM-1110 revision 9
>Machine: Compaq iPAQ H3800
>Ignoring unrecognised tag 0x5441000a
>On node 0 totalpages: 16384
>zone(0): 16384 pages.
>zone(1): 0 pages.
>zone(2): 0 pages.
>Kernel command line: mtdpart=bootldr@0x00000000:0x00040000,root@0x00040000:0x01F
>80000,asset@0x01FC0000:0x00040000 noinitrd root=/dev/mtdblock1 init=/linuxrc co
>nsole=ttySA0
>Console: colour dummy device 80x30
>Calibrating delay loop... 137.21 BogoMIPS
>Memory: 64MB = 64MB total
>Memory: 62936KB available (1158K code, 299K data, 68K init)
>Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
>Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
>Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
>Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
>Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
>POSIX conformance testing by UNIFIX
>Linux NET4.0 for Linux 2.4
>Based upon Swansea University Computer Society NET3.039
>Initializing RT netlink socket
>CPU clock: 206.400 MHz (0.000-206.400 MHz)
>sa1110_clk_init: h3xxx_membank_size[0]=67108864
>sa1110_clk_init: 100 MHz Samsung 8Mx16bitx4banks SDRAM
>SDRAM: tck: 10 trcd: 20 trp: 20 twr: 10 refresh: 64000 cas_latency: 3
>Starting kswapd
>devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
>devfs: boot_options: 0x1
>JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
>ttySA%d0 at MEM 0x80050000 (irq = 17) is a SA1100
>Console: switching to colour frame buffer device 40x30
>iPAQ H3600 keyboard driver v1.0.1
>pty: 256 Unix98 ptys configured
>block: 128 slots per queue, batch=32
>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
>SA1100 flash: probing 32-bit flash bus
>parse_mtdpart{bootldr@0x00000000:0x00040000,root@0x00040000:0x01F80000,asset@0x0
>1FC0000:0x00040000}
> name=bootldr
> at_pos=0x00000000
> colon_pos=0x00040000,root@0x00040000:0x01F80000,asset@0x01FC0000:0x0004
>0000
> comma_pos=,root@0x00040000:0x01F80000,asset@0x01FC0000:0x00040000
> name=root
> at_pos=0x00040000
> colon_pos=0x01F80000,asset@0x01FC0000:0x00040000
> comma_pos=,asset@0x01FC0000:0x00040000
> name=asset
> at_pos=0x01FC0000
> colon_pos=0x00040000
> comma_pos=<NULL>
>npartitions=3
> partition bootldr o=0 s=40000
> partition root o=40000 s=1f80000
> partition asset o=1fc0000 s=40000
>parse_mtdpart: ret=3
>Using Compaq bootldr partition definition
>Creating 3 MTD partitions on "SA1100 flash":
>0x00000000-0x00040000 : "bootldr"
>mtd: Giving out device 0 to bootldr
>0x00040000-0x01fc0000 : "root"
>mtd: Giving out device 1 to root
>0x01fc0000-0x02000000 : "asset"
>mtd: Giving out device 2 to asset
>NET4: Linux TCP/IP 1.0 for NET4.0
>IP Protocols: ICMP, UDP, TCP, IGMP
>IP: routing cache hash table of 512 buckets, 4Kbytes
>TCP: Hash tables configured (established 4096 bind 4096)
>IPv4 over IPv4 tunneling driver
>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
>NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
>mtdblock_open
>ok
>mtdblock_open
>mtdblock_release
>ok
>mtdblock_open
>mtdblock_release
>ok
>VFS: Mounted root (jffs2 filesystem).
>Mounted devfs on /dev
>Freeing init memory: 68K
>Setting up RAMFS, please wait...
>Setting up some devices
>Executing /sbin/init...
>INIT: version 2.78 booting
>Calculating module dependencies... done.
>Loading modules: apm Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/
>h3600_hal.o
>H3600 Registering HAL abstraction layer
>register_serial_h3800 0
> membase=f0000a00 irq=53
>serial_h3800_config_port c0167dd4 flags=1
>serial_h3800_request_port c0167dd4 mapbase=49000a00
>ttySB%d0 at MEM 0x49000a00serial_h3800_type c0167dd4
> (irq = 53) is a H3800_ASIC
>Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/apm.o
>apm: BIOS version 1.2 Flags 0x02 (Driver version 1.13)
>h3600_ts Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600_hal.o
>Using /lib/modules/2.4.18-rmk3/kernel/drivers/char/h3600_ts.o
>h3600_ts_init_module: registering char device
>sa1100-rtc Using /lib/modules/2.4.18-rmk3/kernel/drivers/char/sa1100-rtc.o
>SA1100 Real Time Clock driver v1.03
>h3600-sleeve Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600_ha
>l.o
>Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600-sleeve.o
>h3600_generic_sleeve Using /lib/modules/2.4.18-rmk3/kernel/drivers/char/serial.o
>
>Serial driver version 5.05c (2001-07-08) with no serial options enabled
>Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600_hal.o
>Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600-sleeve.o
>Using /lib/modules/2.4.18-rmk3/pcmcia/pcmcia_core.o
>Linux Kernel Card Services 3.1.22
> options: [pm]
>Using /lib/modules/2.4.18-rmk3/pcmcia/sa1100_cs.o
><6>SA-1100 PCMCIA (CS release 3.1.22)
>installing h3600_pcmcia_ops
>sa1100_pcmcia_driver_init: pcmcia_low_level=c49a25c0
>sa1100_pcmcia_driver_init: skt=0 skt->virt_io=c49b0000
>sa1100_pcmcia_driver_init: skt=1 skt->virt_io=c49d0000
>sa1100_pcmcia_driver_init: done
>Using /lib/modules/2.4.18-rmk3/pcmcia/h3600_generic_sleeve.o
>h3600-uda1341 Using /lib/modules/2.4.18-rmk3/kernel/drivers/sound/sa1100-audio-m
>ono.o
>Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600_hal.o
>Using /lib/modules/2.4.18-rmk3/kernel/drivers/sound/h3600-uda1341.o
>iPAQ audio support initialized
>
>Mounting local filesystems...
>mtdblock_open
>mtdblock_release
>ok
>Setting the System Clock using the Hardware Clock as reference...
>INIT: Entering runlevel: 2
>Configuring network interfaces: done.
>Not recalculating module dependencies
>Loading modules: apm Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/
>h3600_hal.o
>Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/apm.o
>h3600_ts Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600_hal.o
>Using /lib/modules/2.4.18-rmk3/kernel/drivers/char/h3600_ts.o
>sa1100-rtc Using /lib/modules/2.4.18-rmk3/kernel/drivers/char/sa1100-rtc.o
>h3600-sleeve Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600_ha
>l.o
>Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600-sleeve.o
>h3600_generic_sleeve Using /lib/modules/2.4.18-rmk3/kernel/drivers/char/serial.o
>
>Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600_hal.o
>Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600-sleeve.o
>Using /lib/modules/2.4.18-rmk3/pcmcia/pcmcia_core.o
>Using /lib/modules/2.4.18-rmk3/pcmcia/sa1100_cs.o
>Using /lib/modules/2.4.18-rmk3/pcmcia/h3600_generic_sleeve.o
>h3600-uda1341 Using /lib/modules/2.4.18-rmk3/kernel/drivers/sound/sa1100-audio-m
>ono.o
>Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600_hal.o
>Using /lib/modules/2.4.18-rmk3/kernel/drivers/sound/h3600-uda1341.o
>
>Starting PCMCIA services: modulesUsing /lib/modules/2.4.18-rmk3/pcmcia/pcmcia_co
>re.o
>insmod: A module named pcmcia_core already exists
>Using /lib/modules/2.4.18-rmk3/pcmcia/sa1100_cs.o
>insmod: A module named sa1100_cs already exists
>Using /lib/modules/2.4.18-rmk3/pcmcia/ds.o
> cardmgr.
>cardmgr[250]: starting, version is 3.1.22
>cardmgr[250]: watching 2 sockets
>cardmgr[250]: socket 1: ATA/IDE Fixed Disk
>Starting OpenBSD Secure Shell server: sshdcardmgr[250]: executing: 'modprobe ide
>-cs'
>Uniform Multi-Platform E-IDE driver Revision: 6.31
>ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
>cardmgr[250]: + Using /lib/modules/2.4.18-rmk3/kernel/drivers/ide/ide-mod.o
>cardmgr[250]: + Using /lib/modules/2.4.18-rmk3/pcmcia/pcmcia_core.o
>cardmgr[250]: + Using /lib/modules/2.4.18-rmk3/pcmcia/ds.o
>.
>Starting syslogd/klogd: done
>Trying to free nonexistent resource <c49d0000-c49d000f>
>Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/sa1100usb_core.o
>hda: IBM-DSCM-11000, ATA DISK drive
>ide0 at 0xc49d0000-0xc49d0007,0xc49d000e on irq 32
>SA1100 USB Controller Core Initialized
>Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/usb-eth.o
>ide_cs: hda: Vcc = 3.3, Vpp = 0.0
>usbctl: Opened for usb-eth
>usbctl: Started for usb-eth
>SIOCSIFFLAGS: No such device
>SIOCSIFFLAGS: No such device
>hda: 2104704 sectors (1078 MB) w/60KiB Cache, CHS=2088/16/63
>Partition check:
> /dev/ide/host0/bus0/target0/lun0:
>familiar login: p1 p2
> /dev/ide/host0/bus0/target0/lun0: p1 p2
> /dev/ide/host0/bus0/target0/lun0: p1 p2
> /dev/ide/host0/bus0/target0/lun0: p1 p2
> /dev/ide/host0/bus0/target0/lun0: p1 p2
> /dev/ide/host0/bus0/target0/lun0: p1 p2
> /dev/ide/host0/bus0/target0/lun0: p1 p2
>FAT: bogus logical sector size 0
>VFS: Can't find a valid FAT filesystem on dev 03:01.
>
>
>
>--__--__--
>
>_______________________________________________
>Intimate mailing list
>Intimate@handhelds.org
>http://handhelds.org/mailman/listinfo/intimate
>
>
>End of Intimate Digest
>
You can run intimate on 3800 using chroot. just make sure the reiserfs
module is loaded and mount the drive with "mount /dev/hda1 /mnt/hda"
then chroot to /mnt/hda.. at that point you will have the intimate
prompt. For running the Xserver that way check the mail archives.. I
detailed a chroot how-to there. You will have to stop your gpe or opie
display before chrooting to intimate.
Good Luck
Mark Berry
Received on Wed Jan 08 19:47:37 2003
This archive was generated by hypermail 2.1.8 : Tue May 04 2004 - 09:42:41 EDT