Further

  
Following reboot I get the following messages:

/mnt/ramfs/tmp/intimate # reboot

Broadcast message from root (ttySA0) Wed Jan 8 15:38:35 2003...

The system is going down for reboot NOW !!
INIT: Switching to runlevel: 6
INIT: Sending processes the TERM signal
INIT: Sending processes the ūSaving the System Clock time to the Hardware Clock.
..
1
2
cardmgr[250]: executing: './ide check hda'
cardmgr[250]: executing: './ide stop hda'
cardmgr[250]: + umount: /dev/hda1: Device or resource busy
cardmgr[250]: stop cmd exited with status 1
cardmgr[250]: executing: 'modprobe -r ide-cs'
cardmgr[250]: exiting
Deactivating swap... done.
Unmounting local filesystems... umount: forced umount of none failed!
done.
Rebooting... Uncompressing Linux............................................. do
ne, booting the kernel.
Linux version 2.4.18-rmk3 (andyc@rockhopper.crl.dec.com) (gcc version 2.95.2 199
91024 (release)) #1 Tue Oct 15 14:38:20 EDT 2002
Processor: Intel StrongARM-1110 revision 9
Machine: Compaq iPAQ H3800
Ignoring unrecognised tag 0x5441000a
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: mtdpart=bootldr@0x00000000:0x00040000,root@0x00040000:0x01F
80000,asset@0x01FC0000:0x00040000 noinitrd root=/dev/mtdblock1 init=/linuxrc co
nsole=ttySA0
Console: colour dummy device 80x30
Calibrating delay loop... 137.21 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62936KB available (1158K code, 299K data, 68K init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
CPU clock: 206.400 MHz (0.000-206.400 MHz)
sa1110_clk_init: h3xxx_membank_size[0]=67108864
sa1110_clk_init: 100 MHz Samsung 8Mx16bitx4banks SDRAM
SDRAM: tck: 10 trcd: 20 trp: 20 twr: 10 refresh: 64000 cas_latency: 3
Starting kswapd
devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
ttySA%d0 at MEM 0x80050000 (irq = 17) is a SA1100
Console: switching to colour frame buffer device 40x30
iPAQ H3600 keyboard driver v1.0.1
pty: 256 Unix98 ptys configured
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
SA1100 flash: probing 32-bit flash bus
parse_mtdpart{bootldr@0x00000000:0x00040000,root@0x00040000:0x01F80000,asset@0x0
1FC0000:0x00040000}
         name=bootldr
         at_pos=0x00000000
         colon_pos=0x00040000,root@0x00040000:0x01F80000,asset@0x01FC0000:0x0004
0000
         comma_pos=,root@0x00040000:0x01F80000,asset@0x01FC0000:0x00040000
         name=root
         at_pos=0x00040000
         colon_pos=0x01F80000,asset@0x01FC0000:0x00040000
         comma_pos=,asset@0x01FC0000:0x00040000
         name=asset
         at_pos=0x01FC0000
         colon_pos=0x00040000
         comma_pos=<NULL>
npartitions=3
        partition bootldr o=0 s=40000
        partition root o=40000 s=1f80000
        partition asset o=1fc0000 s=40000
parse_mtdpart: ret=3
Using Compaq bootldr partition definition
Creating 3 MTD partitions on "SA1100 flash":
0x00000000-0x00040000 : "bootldr"
mtd: Giving out device 0 to bootldr
0x00040000-0x01fc0000 : "root"
mtd: Giving out device 1 to root
0x01fc0000-0x02000000 : "asset"
mtd: Giving out device 2 to asset
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
IPv4 over IPv4 tunneling driver
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
mtdblock_open
ok
mtdblock_open
mtdblock_release
ok
mtdblock_open
mtdblock_release
ok
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing init memory: 68K
Setting up RAMFS, please wait...
Setting up some devices
Executing /sbin/init...
INIT: version 2.78 booting
Calculating module dependencies... done.
Loading modules: apm Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/
h3600_hal.o
H3600 Registering HAL abstraction layer
register_serial_h3800 0
 membase=f0000a00 irq=53
serial_h3800_config_port c0167dd4 flags=1
serial_h3800_request_port c0167dd4 mapbase=49000a00
ttySB%d0 at MEM 0x49000a00serial_h3800_type c0167dd4
 (irq = 53) is a H3800_ASIC
Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/apm.o
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.13)
h3600_ts Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600_hal.o
Using /lib/modules/2.4.18-rmk3/kernel/drivers/char/h3600_ts.o
h3600_ts_init_module: registering char device
sa1100-rtc Using /lib/modules/2.4.18-rmk3/kernel/drivers/char/sa1100-rtc.o
SA1100 Real Time Clock driver v1.03
h3600-sleeve Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600_ha
l.o
Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600-sleeve.o
h3600_generic_sleeve Using /lib/modules/2.4.18-rmk3/kernel/drivers/char/serial.o

Serial driver version 5.05c (2001-07-08) with no serial options enabled
Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600_hal.o
Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600-sleeve.o
Using /lib/modules/2.4.18-rmk3/pcmcia/pcmcia_core.o
Linux Kernel Card Services 3.1.22
  options: [pm]
Using /lib/modules/2.4.18-rmk3/pcmcia/sa1100_cs.o
<6>SA-1100 PCMCIA (CS release 3.1.22)
installing h3600_pcmcia_ops
sa1100_pcmcia_driver_init: pcmcia_low_level=c49a25c0
sa1100_pcmcia_driver_init: skt=0 skt->virt_io=c49b0000
sa1100_pcmcia_driver_init: skt=1 skt->virt_io=c49d0000
sa1100_pcmcia_driver_init: done
Using /lib/modules/2.4.18-rmk3/pcmcia/h3600_generic_sleeve.o
h3600-uda1341 Using /lib/modules/2.4.18-rmk3/kernel/drivers/sound/sa1100-audio-m
ono.o
Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600_hal.o
Using /lib/modules/2.4.18-rmk3/kernel/drivers/sound/h3600-uda1341.o
iPAQ audio support initialized

Mounting local filesystems...
mtdblock_open
mtdblock_release
ok
Setting the System Clock using the Hardware Clock as reference...
INIT: Entering runlevel: 2
Configuring network interfaces: done.
Not recalculating module dependencies
Loading modules: apm Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/
h3600_hal.o
Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/apm.o
h3600_ts Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600_hal.o
Using /lib/modules/2.4.18-rmk3/kernel/drivers/char/h3600_ts.o
sa1100-rtc Using /lib/modules/2.4.18-rmk3/kernel/drivers/char/sa1100-rtc.o
h3600-sleeve Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600_ha
l.o
Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600-sleeve.o
h3600_generic_sleeve Using /lib/modules/2.4.18-rmk3/kernel/drivers/char/serial.o

Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600_hal.o
Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600-sleeve.o
Using /lib/modules/2.4.18-rmk3/pcmcia/pcmcia_core.o
Using /lib/modules/2.4.18-rmk3/pcmcia/sa1100_cs.o
Using /lib/modules/2.4.18-rmk3/pcmcia/h3600_generic_sleeve.o
h3600-uda1341 Using /lib/modules/2.4.18-rmk3/kernel/drivers/sound/sa1100-audio-m
ono.o
Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/h3600_hal.o
Using /lib/modules/2.4.18-rmk3/kernel/drivers/sound/h3600-uda1341.o

Starting PCMCIA services: modulesUsing /lib/modules/2.4.18-rmk3/pcmcia/pcmcia_co
re.o
insmod: A module named pcmcia_core already exists
Using /lib/modules/2.4.18-rmk3/pcmcia/sa1100_cs.o
insmod: A module named sa1100_cs already exists
Using /lib/modules/2.4.18-rmk3/pcmcia/ds.o
 cardmgr.
cardmgr[250]: starting, version is 3.1.22
cardmgr[250]: watching 2 sockets
cardmgr[250]: socket 1: ATA/IDE Fixed Disk
Starting OpenBSD Secure Shell server: sshdcardmgr[250]: executing: 'modprobe ide
-cs'
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
cardmgr[250]: + Using /lib/modules/2.4.18-rmk3/kernel/drivers/ide/ide-mod.o
cardmgr[250]: + Using /lib/modules/2.4.18-rmk3/pcmcia/pcmcia_core.o
cardmgr[250]: + Using /lib/modules/2.4.18-rmk3/pcmcia/ds.o
.
Starting syslogd/klogd: done
Trying to free nonexistent resource <c49d0000-c49d000f>
Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/sa1100usb_core.o
hda: IBM-DSCM-11000, ATA DISK drive
ide0 at 0xc49d0000-0xc49d0007,0xc49d000e on irq 32
SA1100 USB Controller Core Initialized
Using /lib/modules/2.4.18-rmk3/kernel/arch/arm/mach-sa1100/usb-eth.o
ide_cs: hda: Vcc = 3.3, Vpp = 0.0
usbctl: Opened for usb-eth
usbctl: Started for usb-eth
SIOCSIFFLAGS: No such device
SIOCSIFFLAGS: No such device
hda: 2104704 sectors (1078 MB) w/60KiB Cache, CHS=2088/16/63
Partition check:
 /dev/ide/host0/bus0/target0/lun0:
familiar login: p1 p2
 /dev/ide/host0/bus0/target0/lun0: p1 p2
 /dev/ide/host0/bus0/target0/lun0: p1 p2
 /dev/ide/host0/bus0/target0/lun0: p1 p2
 /dev/ide/host0/bus0/target0/lun0: p1 p2
 /dev/ide/host0/bus0/target0/lun0: p1 p2
 /dev/ide/host0/bus0/target0/lun0: p1 p2
FAT: bogus logical sector size 0
VFS: Can't find a valid FAT filesystem on dev 03:01.
Received on Wed Jan 08 15:42:11 2003