On Sun, May 12 '02 at 11:17, kyi wrote:
> I have installed Intimate onto a IBM Travlestar 6.4gig w/ ide pcmcia
> controler, seen by the system as hda. Familiar sees it just fine w/o
> modifactions. I Had no errors installing Intimate but when I reboot w/ hd
> attached intimate never comes up. Am I missing something i here. Or is
> there something that I still need to do that the online instructions
> don't cover.
while I had a simmilar problem with intimate on my 20GB IBM DTLA or
simmilar (a regular 3.5" HDD) with PCMCIA IDE controller this is not (yet?)
yours.
My PCMCIA controller was only detected if I removed and resinserted the
PCMCIA controller after cardservices was started.
> I can see the linuxrc.intimate on '/', although it seems that it never
> gets called. Thanks in advance for any help.
You must rename your existing linuxrc to e.g. linuxrc.familiar and than
crete a link from linuxrc.intimate to linuxrc
# mv linuxrc linuxrc.familiar
# ln -s linuxrc.intimate linuxrc
Cu,
Goetz.
Received on Sun May 12 2002 - 21:04:59 EDT
This archive was generated by hypermail 2.2.0 : Mon Jul 25 2005 - 17:21:12 EDT