RE: intimate installs but won't boot.

hmm. It should not be required for the dual sleeve with 2.4.6. I'll take a
look at the dependence on the backpaq-modules file list.

Jamey

> -----Original Message-----
> From: Alon Peterson [mailto:arpeters@wins.hrl.com]
> Sent: Thursday, August 09, 2001 6:28 PM
> To: Alon Peterson
> Cc: intimate@handhelds.org
> Subject: Re: [Intimate] intimate installs but won't boot.
>
>
> Well, nevermind, all. It turns out that it was actually missing the
> backpaq-modules package. I had mistakenly assumed that since
> familiar
> worked without those modules, that intimate would too. It turns out,
> that it needs those modules to work with the dual-sleeve inside the
> linuxrc.intimate portion of bootup. Oh well.
>
> -Alon
>
> Alon Peterson wrote:
>
> > I really hope someone can help me fix this. I'm trying to get
> > Intimate installed on an iPAQ 3670 with a 16mb flash, a dual-pcmcia
> > sleeve, a wavelan card, and a 1GB Microdrive. I started with the
> > installation of Intimate from scratch, following the
> instructions at
> > http://www.handhelds.org/z/wiki/Linux2.4.6 and on the Intimate
> > installation page. I used the kernel image
> > 'zImage-2.4.6-rmk1-np2-devfs', and the root image
> > 'task-bootstrap-2.4.6-rmk1-np2-devfs-hh4.jffs2'. I had to
> install the
> > pcmcia and kernel modules serperately, but I got the thing to boot
> > finally detecting both cards in the sleeve and talking over the
> > network through the wavelan card. I still haven't gotten X
> to work,
> > but I'm not really concerned with that. What I am
> concerned with is
> > that I've gotten Intimate to install with no errors, and
> the linuxargs
> > changed successfully, but it fails to boot. The following are the
> > boot messages that I think are relevant:
> >
>
>
> _______________________________________________
> Intimate mailing list
> Intimate@handhelds.org
> http://handhelds.org/mailman/listinfo/intimate
>
Received on Thu Aug 9 15:26:23 2001