Hi,
let me share my installation experiences before I go to bed. I did not
attempt to fix anything of this yet, feel free to offer suggestions
before I bug you in IRC later.
Sorry, this is long, but I guess I cannot hide anything from you :)
I am installing from current familiar unstable, over modem, took
about 3 hours with 56k.
* ntpdate said it couldn't find any suitable servers.
* mkreiserfs made my ppp connection (ttySA0) go away several times, I
had to format the HD on my Laptop finally.
* rsync'ing went fine.
* The debian.org servers had some problems (that is common for me on
my other machines), but with intimate, there was no easy way to
just try to run apt-get update again (it could not load some
package files). Thus, the rest of the package install looked like
this (what was left in my rxvt buffer):
[...]
This typically means that the package was mentioned in a dependency and
never uploaded, has been obsoleted or is not available with the contents
of sources.list
W: Couldn't stat source package list http://http.us.debian.org unstable/main Packages (/var/lib/apt/lists/http.us.debian.org_debian_dists_unstable_main_binary-arm_Packages) - stat (2 No such file or directory)
W: You may want to run apt-get update to correct these missing files
E: Package libncurses5-dev has no installation candidate
rm: cannot remove `/mnt/hda1/var/cache/apt/archives/*.deb': No such file or directory
Installing extra command line tools...
Reading Package Lists...
Building Dependency Tree...
Package strace has no available version, but exists in the database.
This typically means that the package was mentioned in a dependency and
never uploaded, has been obsoleted or is not available with the contents
of sources.list
W: Couldn't stat source package list http://http.us.debian.org unstable/main Packages (/var/lib/apt/lists/http.us.debian.org_debian_dists_unstable_main_binary-arm_Packages) - stat (2 No such file or directory)
W: You may want to run apt-get update to correct these missing files
E: Package strace has no installation candidate
rm: cannot remove `/mnt/hda1/var/cache/apt/archives/*.deb': No such file or directory
Installing the X system....
Reading Package Lists...
Building Dependency Tree...
W: Couldn't stat source package list http://http.us.debian.org unstable/main Packages (/var/lib/apt/lists/http.us.debian.org_debian_dists_unstable_main_binary-arm_Packages) - stat (2 No such file or directory)
W: You may want to run apt-get update to correct these missing files
E: Couldn't find package rxvt
rm: cannot remove `/mnt/hda1/var/cache/apt/archives/*.deb': No such file or directory
Installing some X apps...
Reading Package Lists...
Building Dependency Tree...
W: Couldn't stat source package list http://http.us.debian.org unstable/main Packages (/var/lib/apt/lists/http.us.debian.org_debian_dists_unstable_main_binary-arm_Packages) - stat (2 No such file or directory)
W: You may want to run apt-get update to correct these missing files
E: Couldn't find package wmapm
rm: cannot remove `/mnt/hda1/var/cache/apt/archives/*.deb': No such file or directory
Finished installing .debs...
OK.. onto the final stage..
This is where we install the intimateboot package and set your bootparams correctly
Would you like to install the intimateboot package? [y/n]? y
done
Getting install_2.pnm.tgz ...Checking the md5sum... OK... done
done
Getting ipaqbb.tgz ...Checking the md5sum... OK... done
Unpacking intimateboot...Done.
Configuring intimateboot...
Now.. let's have a look at those bootparams
found 4 partitions
partition: 0 -> bootldr base: 0 size: 262144 bytes (2) [PATCH_BOOTLDR ]
partition: 1 -> params base: 262144 size: 262144 bytes (0) []
partition: 2 -> kernel base: 524288 size: 524288 bytes (0) []
partition: 3 -> root base: 1048576 size: 15728640 bytes (16) [JFFS2 ]
Current args:
bootldr: set linuxargs "noinitrd root=/dev/mtdblock/3 init=/linuxrc console=ttySA0"
Your linuxargs need to contain devfs=mount and init=/linuxrc.intimate
In order to correctly boot with this package installed.
Answering 'y' to the following question will set your bootparams to the
following:
noinitrc root=/dev/mtdblock3 init=/linuxrc.intimate console=ttySA0 devfs=mount
Would you like me to set your bootparams for you? [y/n]? y
Backing up /dev/mtdblock1
512+0 records in
512+0 records out
Verifying bootparams...OK :)
Done.
All done.. shutting down installer
Installer cleaning up...
bash-2.03#
Okay. I can fix this myself:
bash-2.03# apt-get -f install
bash: apt-get: command not found
Argh. I call apt-get with the full path, but it cannot find its
libapt-pkg-libc6.2-3-2.so.3.1.
I feel too lazy to set the paths by hand, so I reboot, hoping that
it fixes itself.
The kernel comes up, on the iPAQ I see:
[Tux pic here]
Setting unmounting /boot...
Setting up devices nodes...
Then it sits there. I try to ppp in, but it says:
[...]
Connect: ppp0 <--> dev/ttyS0
Serial line is looped back.
Connection terminated.
Okay, minicom it is:
INIT: version 2.78 booting
VFS: Busy inodes after unmount. Self-destruct in 5 seconds. Have a nice day...
Calculated used size 0000067c != stored used size 00015530
kernel BUG at nodemgmt.c:269!
Unable to handle kernel NULL pointer dereference at virtual address 00000000
pgd = c0004000
*pgd = c0002001, *pmd = c0002001, *pte = c000108b, *ppte = c000100a
Internal error: Oops: ffffffff
CPU: 0
pc : [<c001c370>] lr : [<c0023030>]
sp : c1e8fdc8 ip : c1e8fd84 fp : c1e8fdd8
r10: c1fdd8a4 r9 : 0000067b r8 : 00000000
r7 : 0000067c r6 : c1ebefa0 r5 : c1fdb8c0 r4 : 00000000
r3 : 00000000 r2 : 00000001 r1 : 00000001 r0 : 00000001
Flags: nZCv IRQs on FIQs on Mode SVC_32 Segment kernel
Control: C18AD17F Table: C18AD17F DAC: 0000001D
Process jffs2_gcd_mtd3 (pid: 8, stackpage=c1e8f000)
Code: eb001aae e3a03000 (e5833000) e91ba810 c00f0254
Stack:
c1e8fda0: c0023030 c001c
c1e8fdc0: 60000013 ffffffff c1fdd8a4 c1e8fe08 c1e8fddc c0077ed8 c001c338 00e14
c1e8fde0: 00000000 c1ebefa0 00000000 00000000 c1ebefa0 c1e8fe98 c1eb0600 c1e8f
c1e8fe00: c1e8fe0c c0079e0c c0077c3c 00000000 c1e8fe1c c1e8fe90 c18f3368 00000
c1e8fe20: c1e8fe98 00000044 c1f47000 00000637 4ec27d4d 3b527b8a 3b25262f 9301c
c1e8fe40: c18f3260 c1f47000 ffffffff c1e8ff04 c1e8fe5c c007cd40 c0079bb0 00e14
c1e8fe60: 00000000 000d1f40 c1e8fed4 c1045000 c0195294 c1f47000 0004f000 0004e
c1e8fe80: c18f3368 c1fdd8a4 0002b14c 00e14eb4 00000637 00001000 e0021985 00000
c1e8fea0: 34326f58 000008a9 00001c43 000081ed 00000000 000d1f40 4ec27d4d 3b252
c1e8fec0: 3b527b8a 0004e000 00000637 00001000 00000006 1da1b667 9301c2c5 c1ec1
c1e8fee0: c1fdb668 c18f3260 c18f3368 c012d980 00000001 c1fdd8a4 c1e8ff50 c1e8f
c1e8ff00: c007be54 c007c9f4 0004e000 0004f000 c1fdd8cc c1fdd800 00000000 0004f
c1e8ff20: 0004e000 c1eb9370 c012d980 c1e8e000 c1e8e000 c1fdd8a4 c1e8e320 c00fe
c1e8ff40: c1e8e330 c1e8fffc c1e8ff54 c007e32c c007ba08 00000001 00000000 00000
c1e8ff60: 00000000 00000000 00000000 00000000 00000000 e35ff41f 7ad1c63e 73df1
c1e8ff80: d5d2773f 4ef8ce3f aeb00ef3 00000001 c1e8e000 00000000 00000000 00000
c1e8ffa0: 00000000 00000000 00000000 c1e8ffb8 c0017600 c001fe88 00000000 00000
c1e8ffc0: 00000600 c007e12c c1fdd8a4 c1fdd8b8 00000000 c1fdd8a4 c1fdd8b8 00000
c1e8ffe0: c1fdd800 c1fdd8d4 c1fdd958 c1fdd95c 00000000 c1e90000 c00189fc c007e
Backtrace:
Function entered at [<c001c32c>] from [<c0077ed8>]
r4 = C1FDD8A4
Function entered at [<c0077c30>] from [<c0079e0c>]
r8 = C1EB0600 r7 = C1E8FE98 r6 = C1EBEFA0 r5 = 00000000
r4 = 00000000
Function entered at [<c0079ba4>] from [<c007cd40>]
Function entered at [<c007c9e8>] from [<c007be54>]
Function entered at [<c007b9fc>] from [<c007e32c>]
Function entered at [<c007e12c>] from [<c00189fc>]
Activating swap...
Adding Swap: 30740k swap-space (priority -1)
Checking root file system...
Parallelizing fsck version 1.20 (25-May-2001)
fsck: fsck.reiserfs: not found
fsck: Error 2 while executing fsck.reiserfs for /dev/ide/host0/bus0/target0/lun1
Calculating module dependencies... done.
Loading modules: apm Warning: /lib/modules/2.4.3-rmk2-np1/kernel/arch/arm/mach-)
o symbol for parameter bounce_interval not found
h3600_ts sa1100-rtc SA1100 Real Time Clock Driver v0.02
Checking all file systems...
Parallelizing fsck version 1.20 (25-May-2001)
Setting kernel variables.
Loading the saved-state of the serial devices...
Mounting local filesystems...
none on /dev/pts type devpts (rw,mode=0622)
Running 0dns-down to make sure resolv.conf is ok.../etc/ppp/ip-down.d/0dns-downy
done.
Cleaning: /etc/network/ifstate.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces: done.
Setting the System Clock using the Hardware Clock as reference...
System Clock set. Local time: Sun Sep 1 17:33:19 PDT 2002
Cleaning: /tmp /var/lock /var/run.
Initializing random number generator... done.
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Starting internet superserver: inetd.
Debian GNU/Linux testing/unstable intimate tts/0
intimate login:
I can log in.
And now I go to bed.
Cheers,
Colin
Received on Tue Jul 17 2001 - 02:38:31 EDT
This archive was generated by hypermail 2.2.0 : Mon Jul 25 2005 - 17:21:11 EDT