Palm Tungsten E2 Hardware
Home | Status | Screenshots | Hardware | Downloads | How-To | Bootloader
Good Quality Photos
![[WWW]](/moin/handhelds/img/moin-www.png){kind=small}
You can find good quality photos here!
Bad Quality Photos
Specifications
-
General Device Specification
-
This device was produced by palmOne(the photos are from the brazilian release)
-
CPU
-
Intel 200 MHz XScale PXA255
-
Product page for PXA25x Family
-
Datasheet (PDF) for the PXA255
-
ROM
-
32 MB K9F5608U0C, SAMSUNG FLASH MEMORY
-
RAM
-
16 MB KM281633I, SAMSUNG Mobile-SDRAM
-
Display(the processor has builtin support for TFT LCD display)
-
320x320 TFT LQ030B7DH55, SHARP
-
SD/SDIO/MMC(the processor has builtin support for MMC and SD cards)
-
MMC is fully documented but not SD
-
Audio and Touchscreen
-
WM9712L, WOLFSON AC'97 Audio and Touchpanel CODEC
-
Bluetooth(the processor has builtin support for bluetooth)
-
The processor has a builtin bluetooth UART
-
Palm Multi Connector
-
18 pin connector as used in the Tungsten T5 and Treo 650
-
Described in the
Developer Guide (PDF)
LCD configuration
To be updated later.
| Register | Physical Offset | Value | Meaning |
| LCCR0 | |||
| LCCR1 | |||
| LCCR2 | |||
| LCCR3 | |||
| LCCR4 | |||
| LCCR5 | |||
| FBR0 | |||
| FBR4 | |||
| LIIDR | |||
| OVL1C1 |
GPIO configuration
To be updated later.
| GPIO# | Direction | State | AFR | Interrupt | Function |
| 0 | |||||
| 1 | |||||
| 2 | |||||
| 3 | |||||
| 4 | |||||
| 5 | |||||
| 6 | |||||
| 7 | |||||
| 8 | |||||
| 9 | |||||
| 10 |
Legend:
-
Direction: In - input, Out - output, In/Out - bidirectional
-
State: pin level, GPLR
-
AFR (Alternate Function Number): 0-3, GAFR
-
Interrupt (status): Rising Edge (RE), Falling Edge (FE)
-
Function - description
