Re: usb keyboard

Hmm, even though you mentioned trying two different keyboards (I assume
that's what you meant), this looks like hardware: the 'device not
accepting address' stuff looks suspicious to me.

Hmm, googling around, I see lots of USB problems. This seems to be
hotplugging. What happens if you boot with it in place? (I know that's
not a fix, but it might help debug what's going on)

Ross

On Sun, Sep 19, 2004 at 09:47:54PM +0200, Johannes Wilm wrote:
> Hi, well thanks all.
>
> The thing is that it does not just work - unfortunately. I have tried to
> different keyboards on the tc1000 runnign gentoo and a different linux
> laptop with debian.
>
> I have been on the llinux-usb list, and have downloaded a patch fro
> 2.6.9-rc2, but also that doesn't help.
>
> The outut I get is always the same (witht he device address increasing
> every time):
>
> root@brinsley2: /home/johannes# dmesg -c
> ehci_hcd 0000:00:0c.2: GetStatus port 1 status 001403 POWER sig=k CSC
> CONNECT
> hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
> hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
> ehci_hcd 0000:00:0c.2: CTRL: TypeReq=0x2301 val=0x2 idx=0x0 len=0 ==> -32
> ehci_hcd 0000:00:0c.2: port 1 low speed --> companion
> ehci_hcd 0000:00:0c.2: GetStatus port 1 status 003402 POWER OWNER sig=k
> CSC
> ohci_hcd 0000:00:0c.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC
> LSDA PPS CCS
> hub 2-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
> hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
> ohci_hcd 0000:00:0c.0: CTRL: TypeReq=0x2301 val=0x2 idx=0x0 len=0 ==> -32
> ohci_hcd 0000:00:0c.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC
> LSDA PPS PES CCS
> usb 2-1: new low speed USB device using address 7
> ohci_hcd 0000:00:0c.0: urb ecb74500 path 1 ep0out 5fc20000 cc 5 --> status
> -110
> ohci_hcd 0000:00:0c.0: urb ecb74500 path 1 ep0out 5fc20000 cc 5 --> status
> -110
> usb 2-1: device not accepting address 7, error -110
> ohci_hcd 0000:00:0c.0: CTRL: TypeReq=0x2301 val=0x2 idx=0x0 len=0 ==> -32
> ohci_hcd 0000:00:0c.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC
> LSDA PPS PES CCS
> usb 2-1: new low speed USB device using address 8
> ohci_hcd 0000:00:0c.0: urb ecb74500 path 1 ep0out 5fc20000 cc 5 --> status
> -110
> ohci_hcd 0000:00:0c.0: urb ecb74500 path 1 ep0out 5fc20000 cc 5 --> status
> -110
> usb 2-1: device not accepting address 8, error -110
>
> --
> Johannes Wilm
Received on Tue Sep 21 18:27:59 2004