Re: where can i find the patch full-rx3715-2.6.16-0.3.patch ?

Hello Mr Zheng,

Liangchen Zheng wrote:
> Hi, Roman,
>
> Sorry for bothering you again. I have two more questions.
> 1. I still failed to mount the ipaq file storage, which is vfat
> according to what you said.
> The command I used is
> $mount -t vfat /dev/mtdblock0 /mnt/sdcard
> However, I still got the same error. Do you have any clue for this?
> (There is no file like /dev/mmcblk0pX in my system. The only flash
> device
> I have found in /dev is "mtd0, mtdro0, mtdblock0.)
>

Can you please eject the sdcard and reinsert it and send us a dmesg or
cat /proc/kmsg. Then I can get you the correct command to mount the
partition.

> 2. I have download the kernel 2.6 from the cvs.
> Then, where can I get the file rx3000_static_defconfig and how can I
> use it?

The rx3000 defconfig is actually in the source tree.
/opt/ipaq/linux/kernel26/arch/arm/configs

>
> Thanks a lot.
>
> Regards,
> Liangchen
>
> ----- Original Message ----- From: "Roman Moravcik"
> <roman.moravcik_at_gmail.com>
> To: "LC Zheng" <lzheng_at_uci.edu>
> Cc: <rx3700-port_at_handhelds.org>
> Sent: Tuesday, July 24, 2007 12:45 PM
> Subject: Re: [Rx3700-port] where can i find the patch
> full-rx3715-2.6.16-0.3.patch ?
>
>
>> Hello L.C Zheng,
>>
>> LC Zheng wrote / nap�sal(a):
>>> I could not mount the vfat partition on the NAND. It always complains
>>> "end_request: I/O error, dev mtdblock3, sector 0"
>>> "..."
>>> It seems that somebody have met this problem and solved it with the
>>> following modification: In the file "drivers/mtd/nand/s3c2410.c",
>>> find the function
>>> 3c2410_nand_init_chip() and set:
>>> chip->eccmode = NAND_ECC_NONE;
>>>
>> I don't think there is a vfat partition, i don't know what filesystem
>> is using wince image, but ipaq file storage is using intel psm and it's
>> now vfat.
>>> I don't know if it will work for me. But at least it gives me a hope.
>>> Hence I want to get the kernel sources and have a try on this. I am
>>> currently using 2.6.16 Mini Distro and need to find the full patch for
>>> the linux kernel 2.6.16. I tried the link in the page
>>> http://www.handhelds.org/moin/moin.cgi/HpIpaqRx3715Kernel .
>>> But it doesn't work anymore.
>> Yeah, our wiki pages are little bit outdated. i have new site
>> thanks to marajin:
>>
>> http://www.w-ww.org/~rmoravcik/
>>
>> You can find there new angstrom rootfs images (opie and gpe),
>> precompiled kernel,
>> modules and haret.
>>> Can anyone kindly tell me where I can find this patch:
>>> full-rx3715-2.6.16-0.3.patch ?
>> You don't need that patch, actual rx3000 code is in hh.org cvs.
>> So, you need only download only kernel from cvs and use
>> rx3000_static_defconfig.
>>
>>
>> Roman
>
> _______________________________________________
> Rx3700-port mailing list
> Rx3700-port_at_handhelds.org
> https://www.handhelds.org/mailman/listinfo/rx3700-port
Received on Fri Aug 10 2007 - 00:17:00 EDT