Re: where can i find the patch full-rx3715-2.6.16-0.3.patch ?

Hi, Roman,

     Sorry for bothering you again. I have two more questions.
1. I still failed to mount the ipaq file storage, which is vfat according
to what you said.
     The command I used is
      $mount -t vfat /dev/mtdblock0 /mnt/sdcard
      However, I still got the same error. Do you have any clue for this?
     (There is no file like /dev/mmcblk0pX in my system. The only flash
device
      I have found in /dev is "mtd0, mtdro0, mtdblock0.)

2. I have download the kernel 2.6 from the cvs.
     Then, where can I get the file rx3000_static_defconfig and how can I
use it?

    Thanks a lot.

Regards,
Liangchen

----- Original Message -----
From: "Roman Moravcik" <roman.moravcik_at_gmail.com>
To: "LC Zheng" <lzheng_at_uci.edu>
Cc: <rx3700-port_at_handhelds.org>
Sent: Tuesday, July 24, 2007 12:45 PM
Subject: Re: [Rx3700-port] where can i find the patch
full-rx3715-2.6.16-0.3.patch ?

> Hello L.C Zheng,
>
> LC Zheng wrote / napísal(a):
>> I could not mount the vfat partition on the NAND. It always complains
>> "end_request: I/O error, dev mtdblock3, sector 0"
>> "..."
>> It seems that somebody have met this problem and solved it with the
>> following modification: In the file "drivers/mtd/nand/s3c2410.c", find
>> the function
>> 3c2410_nand_init_chip() and set:
>> chip->eccmode = NAND_ECC_NONE;
>>
> I don't think there is a vfat partition, i don't know what filesystem
> is using wince image, but ipaq file storage is using intel psm and it's
> now vfat.
>> I don't know if it will work for me. But at least it gives me a hope.
>> Hence I want to get the kernel sources and have a try on this. I am
>> currently using 2.6.16 Mini Distro and need to find the full patch for
>> the linux kernel 2.6.16. I tried the link in the page
>> http://www.handhelds.org/moin/moin.cgi/HpIpaqRx3715Kernel .
>> But it doesn't work anymore.
> Yeah, our wiki pages are little bit outdated. i have new site
> thanks to marajin:
>
> http://www.w-ww.org/~rmoravcik/
>
> You can find there new angstrom rootfs images (opie and gpe), precompiled
> kernel,
> modules and haret.
>> Can anyone kindly tell me where I can find this patch:
>> full-rx3715-2.6.16-0.3.patch ?
> You don't need that patch, actual rx3000 code is in hh.org cvs.
> So, you need only download only kernel from cvs and use
> rx3000_static_defconfig.
>
>
> Roman
Received on Wed Jul 25 2007 - 18:40:58 EDT