On 10/1/05, Konstantine <konstantine_at_r66.ru> wrote:
> on 19:06 Fri 30 Sep JeDi wrote:
> > Hi,
> >
> > I'm sorry to bump this list again, but I know someone has already got
> > the kernel to run on a Yakumo Delta 300 GPS, and I don't want to do
> > double work. I emailed the guy that succeeded in it, but no
> > response...
> >
> > What I would really want, is the following:
> > - The current working version of the kernel for the mio 336 (the 168
> > would be even better, as that's the same as my machine), or a working
> > .config if all changes are merged into the cvs handhelds.org kernel
> > - A current initrd to work with that, with which I could start working
> >
> > I'll have a serial cable in a couple of days, but a working
> > kernel+initrd with usb networking support would be even better!
> >
> > A status update would also be great.
> > I hope this project isn't dying...
>
> Sorry for a long period of silence (my mother-board burnd out).
> I'll be at home on monday and e-mail you everything.
I have my serial cable now, but it doesn't seem to work with my kernel...
I've set the mtype to 493, used console=ttyS0,115200n8 and used
minicom (set to /dev/ttyS0, 115200 n81) on my desktop machine, but
nothing came out.
Actually, the pda didn't even hard reset after the linux "boot". The
HaReT penguin just gets his red eyes and the screen slowly fades to
white. Not a single line is shown in minicom.
Can you send me the current files please? Thanks!
Greetz,
JeDi
Received on Mon Oct 03 2005 - 20:01:41 EDT
This archive was generated by hypermail 2.2.0 : Mon Oct 03 2005 - 20:01:46 EDT