Re: Little help needed...

Hi!

You see, you have problems with partition table on it.
Repartition must help.
Just create single primary partition on it, then format it.

There is some tries to make latest kernel running, but not very successful.

2007/6/5, Harald Radke <harryrat_at_gmx.de>:
>
> Hi!
>
> After some months I recently stumbled over my Loox and decided to spend
> some
> time (which i dont have LOL) on it, maybe trying to get Tux on it in the
> end.
>
> I started with the files on
>
> http://undcon.com/pda/linux/
>
>
> Unfortunatly booting stops with
>
> mmcblk0: mmc0:b368 SMI 1960448KiB
> mmcblk0: (3)mmcblk0: error 2 transferring data
> end_request: I/O error, dev mmcblk0, sector 0
> Buffer I/O error on device mmcblk0, logical block 0
> mmcblk0: error 1 sending read/write command
> end_request: I/O error, dev mmcblk0, sector 0
> Buffer I/O error on device mmcblk0, logical block 0
> unable to read partition table
>
> then some more stuff appears , (ramdisk, ...) and it ends after the ts
> line
>
> I tried haret 3.8 as well as the new 4.x but no difference
>
> It looks like the kernel has problems with my 2GB SD card. The card works
> fine
> under WM ):
>
> Any ideas?
>
> Is there anything new to a possible linux port?
>
> thx
>
> Harry
> _______________________________________________
> Loox700-port mailing list
> Loox700-port_at_handhelds.org
> https://www.handhelds.org/mailman/listinfo/loox700-port
>
Received on Tue Jun 05 2007 - 04:39:47 EDT