Re: Touchscreen

hi,

Hi cemmo,
>
> 1)
> I looked into your patch-file and I noticed that you
> have defined all GPIOs of the LOOX 720 (#define
> LOOX720_IRQ(gpio)) and that the ASIC3 is supported by
> your code. Is this code just a placeholder or will it
> be used ?

i just copyed the aximx30 folder to loox720 and renamed the
definitions. there is some code that has to be removed (rewritten)
and definitions that has to be updated.

2)
> A CVS-server definetly would help, since it is always
> difficult to generate the correct sources with just
> those patches!

ok, i see if i can set one up as fast as possible.

3)
> Does your latest patch inculde the correct values for
> LCCR0-LCCR3 (LCD settings) I extracted with HARET?

i had some problems with your settings... first time i booted
it they worked but the times after that not..

currently i use this values:

.pixclock = 0,
.bpp = 16,
.xres = 480,
.yres = 640,
.hsync_len = 4,
.vsync_len = 1,
.left_margin = 20,
.upper_margin = 8,
.right_margin = 8,
.lower_margin = 9,
.sync = 0,
.lccr0 = 0x001000f9,
//.lccr1 = 0x13070ddf,
//.lccr2 = 0x0708027f,
.lccr3 = 0x04700007

cemmo
Received on Mon Jun 26 2006 - 03:58:20 EDT