*MTST
00000001
00000002
00000004
00000008
00000010
00000020
00000040
00000080
00000100
00000200
00000400
00000800
00001000
00002000
00004000
00008000
00010000
00020000
00040000
00080000
00100000
00200000
00400000
00800000
01000000
02000000
04000000
08000000
10000000
20000000
40000000
80000000
ENDM
STKP
C19F3FFC
MMU table start=C19F4000
Boot data start=C19F8000
Boot data size=00008000
Stack data base=C19F0000
Stack data size=00004000
FLASH_BASE=00000000
 Evacuating 1MB of Flash to DRAM at: C1E00000
done
Map Flash virtual section to DRAM at: C1E00000
verify flash size...
btflash_init: mfrid=00890089
  devid=00180018
walking flash descriptors (2x16)
btflash_init: found flash 28F128J3A
  flashDescriptor=0001E3EC
  flashSectors=0001E1CC
  nsectors=00000080
  flash_size=02000000
  flash_address_mask=01FFFFFF
mach_type  ->00000030
allocated partition_table
defining partition: bootldr
defining partition: root
Probing bank0 memory size...
 bank0 memory size=02000000
SDRAM size: 0x02000000
 in megs: 32M
>> Compaq OHH BootLoader, Rev 2-18-15 [BIG_KERNEL] [MONO]
>> 02-03-12_15:00
>> Last link date: Tue Mar 12 15:00:51 EST 2002
>> Contact: bootldr@handhelds.org

>> StrongARM SA-1110 revision B4
>> (c) 2000-2001 Compaq Computer Corporation, provided with NO WARRANTY under the terms of the GNU General Public License.
>> See http://www.handhelds.org/bootldr/ for full license and sourcesPress Return to start the OS now, any other key for monitor menu

params_eval: prefix_in =bootldr:
params_eval: just_show =00000000
defining partition: throwaway_bootldr_partition
params_eval_file: tmpPart->base  =00040000
params_eval_file: tmpPart->size  =01FC0000
Scanning all of flash for your JFFS2 convenience. Est Time: 6-12 seconds!
build_list: max = 01FBFFBC
...........................Offset = 00F0DC58
...........................
.............................................
dir entries = 000006AB
frag entries = 000024D5
+4 increments = 000ECFF9
+file_offset increments = 00002BB4
pef: loaded a file of size 0000004B
+ set linuxargs "noinitrd root=/dev/mtdblock/1 init=/linuxrc console=ttySA0"
  setting param <linuxargs> to value <noinitrd root=/dev/mtdblock/1 init=/linuxrc console=ttySA0>
partition <throwaway_bootldr_partition> deleted
RXSTAT error: 000000FF
booting jffs2...
booting boot/zImage from partition >root<
find_inode failed for name=zImage
Failed to find inode 
loaded file of size = 0x00000000 at location 0xC0008000
kernel partition base C0008000
kernel_magic=20746573
kernel_region_words[9]=6F6C6264
Unrecognized kernel image
boot command failed, entering monitor
boot>