Hi,
I suggest that you just get the correct values by trying. I also did it this
way on the 56x. Just look at it's maximum and let it run all the way down do
find a minimum. Do like 1 poll every 10 or so to get accurate results. That's
it and you're done.
kind regards,
Alex
On Tuesday 05 October 2004 19:45, Jacek Lipkowski wrote:
> does anyone know in what units are the values returned by the mcu after
> GetBatteryData?
>
> the HP documentation doesn't mention the unit, but it seems to be around
> 10mV.
>
> i have a 7.2 volt battery, right now the mcu returns 0x29A for this
> battery (with charger connected, the power supply led is green) - it is
> above 10mV (in this case it would be 6.66V - too low), and probably below
> 11mV (which would give 7.32V - too high).
>
> does anyone know the exact value and the threshold below which the jornada
> is powered off?
>
> jacek
>
>
>
> _______________________________________________
> jornada mailing list
> jornada@handhelds.org
> https://handhelds.org/mailman/listinfo/jornada
Received on Tue Oct 5 13:54:48 2004
This archive was generated by hypermail 2.1.8 : Tue Oct 05 2004 - 13:55:16 EDT