RE: [jornada] Found PCB Manufacturer

John:

About how many? Just ball-park it (20, 50, 100, 1000?)

Anyway, what are "the rest of the manufacturing problems"? Inquiring minds would like to know! ;)

The last two hurdles that I need to overcome (since my CF idea isn't going to work), are (1) what bootloader to use, and (2) how to get the bootloader into the flash chips before (or even after) they are on the board. Any insights you have there would be greatly appreciated.

And thanks for watching this list! It is nice to know that *someone* at HP is at least mildly interested....

Thanks!!!
-MarkG

John Ankcorn wrote ..
>
> All,
>
> I have quite a few of the connectors that I can let you have
> (if you can figure out the rest of the manufacturing problems!)
>
> jca
>
> On Tue, 28 Sep 2004, Mark Gollahon wrote:
>
> > Jason:
> > Quantity 2000 @ $4 eache - Surely not! If this is the case, them I will
> be *VERY* tempted to scuttle my Jornada's current board to recover the
> connector (and the RAM for that matter)....
> > Let me check my suppliers and see what is up with that.
> > So, do you think we could make 2000 boards??? ;)
> > -MarkG
> > Jason Mitchell wrote ..
> > > Mark,
> > >
> > > Sorry for not bringing this up sooner, but there might be a
> > > problem with your plan. Apparantly, the molex connector on the boards
> > > are only available in quantity 2000 (@$4 apiece!):
> > >
> > > http://www.handhelds.org/hypermail/jornada/2/0286.html
> > >
> > > On a more positive note someone named noah was working on boards
> > > before you. I believe that he had gotten some of the connectors from
> HP,
> > > but I'm not sure. Check at the bottom of this page (just search on
> that
> > > page for noah)
> > >
> > > http://www.handhelds.org/hypermail/jornada/5/index.html
> > >
> > > Later on in the thread he gives a complete part list. Maybe that
> > > doesn't matter because you're designing your own board.
> > >
> > > Jason M.
> > >
> > > > -----Original Message-----
> > > > From: Mark Gollahon [mailto:golly@stellarwerx.com]
> > > > Sent: Monday, September 27, 2004 4:58 PM
> > > > To: jornada@handhelds.org
> > > > Subject: [jornada] Found PCB Manufacturer
> > > >
> > > >
> > > > Ok, guys, looks like I've got a PCB manufacturer who has quite
> > > > reasonable prices....
> > > >
> > > > https://www.4pcb.com/!33each1.asp
> > > >
> > > > -Mark Gollahon
> > > >
> >
> >
Received on Tue Sep 28 14:37:28 2004