Re: [jornada] 56x Battery Test 2

Hi,

The AC state can't be read out yet on the jornada, so you have to adjust the
power settings in the "on battery" menu in Opie even when connected to AC
power. It should then work (at least it does work here)
I don't recommend to leave a storage card in the device when suspending as
this causes the oops as you wrote. If everything goes well you should receive
"Stopping tasks: ====================|" when suspending and "Restarting
tasks... done" when resuming.
You can find a good howto about usb networking at
http://handhelds.org/z/wiki/How%20do%20I%20setup%20USB%20networking

cya
Alex

On Friday 21 May 2004 14:42, you wrote:
> On Fri, 2004-05-21 at 06:49, Alex Lange wrote:
> > Hi,
> >
> > please try out my new zImage from http://handhelds.org/~chicken/zImage
> > just replace your current /boot/zImage with it.
> > Things fixed:
> > - USB networking is working (tested)
> > - CF memory cards will be correctly recognised and mounted to /mnt/hda
> > - Battery info should be more accurate
>
> Done! The CF reader works much better. :-)
>
> Something else I've noticed and it carried between zImage files. My
> settings in Opie concerning the turning of of the Jornada don't seem to
> affect it. I set it to never turn off when on AC power. This is not
> working. When it turns off, I get the following on the terminal:
>
> ~ # Stopping tasks: ====================|
> irq93: nobody cared
> PC is at cpu_idle+0x3c/0x58
> LR is at default_idle+0x3c/0x50
> pc : [<c001fcb0>] lr : [<c001fc60>] Not tainted
> sp : c01fffc8 ip : c01fffc8 fp : c01fffdc
> r10: 00000000 r9 : 6901b118 r8 : c0200ec0
> r7 : c023cd9c r6 : c023cd90 r5 : c01fe000 r4 : c001fc24
> r3 : 60000013 r2 : 00000000 r1 : 00000000 r0 : 00000000
> Flags: nZCv IRQs on FIQs on Mode SVC_32 Segment kernel
> Control: C2CE317F Table: C2CE317F DAC: 0000001D
> handlers:
> [<c011e988>] (ide_intr+0x0/0x134)
>
> Also, I changed the dim and backlight off settings and they didn't seem
> to change.
>
> I haven't messed with USB networking yet. Do you know a good guide for
> doing that in Linux? I'll need to do some research on it as I didn't
> have it setup before. I'm using my serial cradle for now.
>
> I'll get back to you on the effectiveness of the battery changes.
>
> JSR/
Received on Fri May 21 2004 - 12:51:35 EDT