Re: [jornada] jornada 568 bricked

From: Alex Lange <alexgrosy.a.t.t-online.de>
Date: Sat Jan 10 2004 - 17:55:42 EST

Hi,

you need to recompile the module. Check if you have the linux kernel source,
and adjust the Makefile of the module that it points to the correct path. The
module should then build without any errors and you should be able to load it
(make sure all pport modules are unloaded first). You can then wire up your
Jornada to reflash some bootloader. Also check that all your soldered jtag
wires make good contact or flashing will fail.
If all fails, feel free to send it in to me to have it debricked.

cya
Alex

On Saturday 10 January 2004 23:18, Marc Kazmierczak wrote:
> I have a fully bricked jornada 568. After an upgrade, I finally lost even
> the genuine bootloader. I was glad to see that a solution based on JTAG
> port has been provided by John Ankcorn to deal with such a disaster. But
> I am a newbie in Linux, and I am unable to load the short.o module (please
> see following example for Mandrake. With the most recent Debian
> distribution, I have also compilation problems with more unresolved items.)
>
> I have been able to load another Jflash version (but for H3600,
> http://axl.freeyellow.com/iPAQ/jtag.htm ) which showed me that my hardware
> connections on JTAG port are OK (SA1110 is detected, readmem is ok, just
> flashwriting doesn't work, due to specific write enabling instructions on
> the 568)
>
> Could you help me please?
>
> Regards,
>
> Marc Kazmierczak
>
> Linux: Mandrake 9.2 , kernel: 2.4.22-10mdk, gcc 3.3.1, glib 2.3.2
>
> [ph@localhost ph]$ su
> [root@localhost afac]# cd driver.2_2
> [root@localhost driver.2_2]# ./short_load
> Warning: The module you are trying to load (short.o) is compiled with a
> gcc version 2 compiler, while the kernel you are running is compiled with
> a gcc version 3 compiler. This is known to not work.
> short.o: unresolved symbol register_chrdev_R1a5f156e
> short.o:
> Hint: You are trying to load a module without a GPL compatible license
> and it has unresolved symbols. Contact the module supplier for
> assistance, only they can help you.
Received on Sat Jan 10 22:54:19 2004

This archive was generated by hypermail 2.1.8 : Tue May 04 2004 - 09:46:01 EDT