Hi,
serial port is very slow and the upload takes around 20-30 minutes. When it's
done you should get some info from the bootloader while programming flash.
If you haven't aready done so I suggest that you upgrade the bootldr to the
new version which supports all 64MB of ram.
have fun
Alex
On Friday 19 December 2003 15:08, Josiah Ritchie wrote:
> I'm uploading the jffs2 file to my jornada 567. Alex, you might remember
> that I thought I'd bricked mine. I figured, I'd get another serial cable to
> be sure that the one I bought wasn't trash before I went and started
> soldering. I'm glad I did. 3 months after the beginning of the install I'm
> finally getting around to finishing it up. I a little unsure if the file is
> actually transferring, but I did get to the boot> prompt and got a response
> when I typed:
>
> boot> load root
> partition root is a jffs2 partition:
> expecting .jffs2 or wince_image.gz.
> After receiving file, will
> automatically uncompress .gz images
> loading flash region root
> using ymodem
> ready for YMODEM transfer...
>
> Should I get a response at this prompt once I start a ymodem transfer? Is
> there another area that should give some indication that data is actually
> being transferred. It's been almost 10 minutes.
>
> Thanks,
> Josiah
> _______________________________________________
> jornada mailing list
> jornada_at_handhelds.org
> https://handhelds.org/mailman/listinfo/jornada
Received on Fri Dec 19 2003 - 15:17:20 EST
This archive was generated by hypermail 2.2.0 : Mon Jul 25 2005 - 17:26:16 EDT