Re: [jornada] Good News

I gave it a 15 minutes of nothing-ness and tried again. It is now indicating
that there is something going on, but errored out. I then played around and
found that boot>? gave help info and used that togather some data. Here's what I
received:

boot> load root
  partition root is a jffs2 partition:
  expecting .jffs2 or wince_image.gz.
After receiving file, will automatically uncompress .gz images
loading flash region root
using ymodem
ready for YMODEM transfer...
C.....Too many errors during
receive; giving up. download error. aborting.
boot> partition
npartitions=00000002
bootldr
  base: 00000000
  size: 00040000
   end: 00040000
 flags: 00000002
root
  base: 00040000
  size: 01FC0000
   end: 02000000
 flags: 00000018
boot> partition show root
npartitions=00000002
bootldr
  base: 00000000
  size: 00040000
   end: 00040000
 flags: 00000002
root
  base: 00040000
  size: 01FC0000
   end: 02000000
 flags: 00000018
boot> ls boot
Scanning all of flash for your JFFS2 convenience. Est Time: 6-12 seconds!
build_list: max = 01FBFFBC
...........................Offset = 001247DC
...........................
.....................................................Offset = 004694A8
...........................
........................................
dir entries = 00000000
frag entries = 00000000
+4 increments = 001A4596
+file_offset increments = 00000001
find_inode failed for name=boot
Failed to scan jffs2 file structure

So what might be causing errors and how can I avoid them?

JSR/

Josiah Ritchie scripted ::

>I'm uploading the jffs2 file to my jornada 567. Alex, you might remember that I
>thought I'd bricked mine. I figured, I'd get another serial cable to be sure
>that the one I bought wasn't trash before I went and started soldering. I'm
>glad I did. 3 months after the beginning of the install I'm finally getting
>around to finishing it up. I a little unsure if the file is actually
>transferring, but I did get to the boot> prompt and got a response when I
>typed:
>
>boot> load root
>partition root is a jffs2 partition:
>
> expecting .jffs2 or wince_image.gz.
> After receiving file, will
>automatically uncompress .gz images
>loading flash region root
>using ymodem
>ready for YMODEM transfer...
>
>Should I get a response at this prompt once I start a ymodem transfer? Is there
>another area that should give some indication that data is actually being
>transferred. It's been almost 10 minutes.
Received on Fri Dec 19 14:37:37 2003