Hi,
if you've flashed bootldr your device may seem bricked as the bootldr for the
Jornada has no screen support nor it does support booting wince. If you
connect with a serial cable to a terminal like minicom you should see bootldr
doing some stuff as described in the howto.
cya
Alex
On Monday 03 November 2003 13:26, Josiah Ritchie wrote:
> Gaétan QUENTIN scripted ::
> >Hi!
> >
> > I have bricked my 568 with bootloadr ...
> > I have bought the serial cable: what is the procedure to see if the
> > bootloadr is alive?
> > Must i push button when powering on?
> > Can i use minicom? What is the configuration?
>
> You want to use minicom (or gtkterm) with 115900, 8bit, no parity, 1 stop
> bit, no flow control. I've not been able to get my 567 to work with this,
> but I'm sure several have with the 568 so it shouldn't be a problem if it
> isn't a full brick.
>
> What directions did you use?
>
> JSR/
> _______________________________________________
> jornada mailing list
> jornada@handhelds.org
> https://handhelds.org/mailman/listinfo/jornada
Received on Mon Nov 03 14:33:54 2003
This archive was generated by hypermail 2.1.8 : Tue May 04 2004 - 09:46:01 EDT