Alex Lange scripted ::
>Hi,
>
>set up minicom that it uses the right minicom (ttyS0 is BIOS Port 1 for
>example, ttyS1 is port 2). Also make sure that the serial module is loaded if
>its not directly in the kernel. You need to set the serial speed to 115200
>baud without any flow control
>
>CTRL-A Z for help |115200 8N1 | NOR | Minicom 2.1 | VT102 | Online
>
>that's how the status line should look like
>
>your device may look like a brick as bootldr does not support booting wince on
>the Jornada. But I don't think that it is bricked.
I tried hyperterminal on an old w95 machine I had around and that didn't make a
connection with 115200 8N1 and no flow control.
JSR/
Received on Tue Oct 21 14:55:37 2003
This archive was generated by hypermail 2.1.8 : Tue May 04 2004 - 09:46:01 EDT