RE: [jornada] pm+pcmcia is working now (with modified 2.4.19-rmk6 )

Kye, your kernel booted just fine.

I can now suspend and resume.
I do see the cards with cardctl.
X is working (with a hack to /etc/X11/Xserver)

What does not work is modules. I cannot load any of the modules. I did
install the modules from your kernelj720.tgz file in /lib/modules but I keep
getting module not found errors.

We are getting closer.

Jamey can you fix the kernel in the feed and I will test that one also?

Thanks

-------------------------------------------------------
Anthony W. Clem, CISSP, CCSA, OPST (404)774-3966
Senior Security Consultant (800)477.6111 x43966
Hewlett-Packard Company
14475 NE 24th St.
Bellevue, WA 98007

-----Original Message-----
From: Kye Connect [mailto:kye_at_pin9.de]
Sent: Saturday, March 15, 2003 6:18 AM
To: CLEM,ANTHONY (HP-USA,ex1)
Cc: 'Kye Connect'; jornada_at_handhelds.org
Subject: Re: [jornada] pm+pcmcia is working now (with modified 2.4.19-rmk6 )

hi,

On 2003.03.14 17:48 "CLEM,ANTHONY (HP-USA,ex1)" wrote:

> ttySA%d0 at MEM 0x80050000 (irq = 17) is a SA1100
> ttySA%d1 at MEM 0x80010000 (irq = 15) is a SA1100
> Configuring Jornada LCD
> [epson1356fb.c:86] e1356fb_set_var() entry [epson1356fb.c:141]
> e1356fb_set_var() exit

this looks to me as jamey has actually not compiled the kernel with the
"current" toolchain (/skiff/local/ gcc2.9.?)but with a different
(newer?) version (/opt/arm gcc3.? )
at the begin of my testing i ran in this problem sometimes and could
linked it to the compilerversion i used, the actuall only compiler that
could make a working kernel seems to me gcc version 2.95.2 19991024
(/skiff/local/)
i am very sorry that i did appearantly not mentioned it clearly enough
but i had simply forgot it as i went on with the testing.

the easiest way around this for the moment would be to use the
kernel/modules-binary i provided on the web , the should work fine. kye
Received on Sun Mar 16 2003 - 17:47:32 EST