Re: [jornada] de-brick

From: Jamey Hicks <jamey.hicks_at_hp.com>
Date: Wed, 09 Oct 2002 12:35:24 -0400

Javier Marcet wrote:

>* Jamey Hicks <Jamey.Hicks_at_hp.com> [021009 14:35]:
>
>
>
>>The intermittent nature of the problem with JTAG makes me think it is a
>>signal integrity problem. I have run into the same thing here on
>>occasion. If you soldered connections, make sure none are cold solder
>>
>>
>
>Yes, I did solder them and that's the first thing I checked. The signals
>seem to be well separated from each other.
>
>
There are two things that are important here. First, that the wires are
not shorted together. Second, that there is a good solid connection for
each wire.

>>joints. I would also recommend making the wires as short as possible.
>>
>>
>
>Oh, I definately can do that. Now that I think of it, that might well be
>the problem since I am using 2 meter 1-wire cables for it. That, and
>making sure all the resistors I bought are really giving the same
>resistance, which I did not check, are the two things I'll do when I get
>home, which will be in about 3 hours and a half from now :)
>
The value of the resistors is not important. The resistors are there to
prevent ringing on the jtag signals. However, such long wires can cause
noise on the signals, so if you still have problems I recommend
shortening it to a half meter or so.

>BTW, is the binary
>ftp://ftp.handhelds.org/feeds/bootldr/bootldr-2.19.30.bin
>supposed to work with the Jornada? Or do I need to recompile it
>specifically for the 56x?
>
That one has not been tested with the jornada. We'd like you to test
it, but John has one he knows works, and the URL is:
    ftp://salsa.lcs.mit.edu/pub/jca/b560

>And if I succesfully load the bootldr, will I need a serial connection?
>Or is there any way I can get linux installed by using only the JTAG
>and USB port? I had successfully used the Jornada through the USB port
>under Linux with WindowsCE on the PDA, if that's of any relevance until
>it is a fully linux machine :)
>
You will need a serial connection to use the bootldr to install linux in
flash.

Jamey
Received on Wed Oct 09 2002 - 16:21:54 EDT

This archive was generated by hypermail 2.2.0 : Mon Jul 25 2005 - 17:26:16 EDT