Re: [jornada] Bootldr problem

Joseph Byfield wrote:

> I downloaded the familiar 8.2 gpe tar file for the h3600, and
> accidently flashed the tar file to my jornada 568 instead of the jff2
> root image inside the tar. Now when the jornada boots up on the serial
> console I get this:

are u sure the h3600 image is working for jornada568?i always used the
jornadabuilds from chicken i.e. and they worked justed fine
(http://handhelds.org/~chicken/)

> JU3
> @0000047C
> FE3A0BEEF
>
> *MTST
> 00000001
> 00000002
> 00000004
> 00000008
> 00000010
> 00000020
> 00000040
> 00000080
> 00000100
> 00000200
> 00000400
> 00000800
> 00001000
> 00002000
> 00004000
> 00008000
> 00010000
> 00020000
> 00040000
> 00080000
> 00100000
> 00200000
> 00400000
> 00800000
> 01000000
> 02000000
> 04000000
> 08000000
> 10000000
> 20000000
> 40000000
> 80000000
> MBK2
> 00000001
> E59F1880
> 00000002
> E59F1880
> 00000004
> E59F1880
> 00000008
> E59F1880
> 00000010
> E59F1880
> 00000020
> E59F1880
> 00000040
> E59F1880
> 00000080
> E59F1880
> 00000100
> E59F1880
> 00000200
> E59F1880
> 00000400
> E59F1880
> 00000800
> E59F1880
> 00001000
> E59F1880
> 00002000
> E59F1880
> 00004000
> E59F1880
> 00008000
> E59F1880
> 00010000
> E59F1880
> 00020000
> E59F1880
> 00040000
> E59F1880
> 00080000
> E59F1880
> 00100000
> E59F1880
> 00200000
> E59F1880
> 00400000
> E59F1880
> 00800000
> E59F1880
> 01000000
> E59F1880
> 02000000
> E59F1880
> 04000000
> E59F1880
> 08000000
> E59F1880
> 10000000
> E59F1880
> 20000000
> E59F1880
> 40000000
> E59F1880
> 80000000
> E59F1880
> ENDM
> STKP
> C19F3FF0
> setting flashword=50000000
> Flash style = 2x16
> verify flash size...
> btflash_init: mfrid=00890089
> devid=00180018
> mfrid=00890089
> deviceid=00180018
> walking flash descriptors (2x16)
> btflash_init: found flash 28F128J3A
> flashDescriptor=000259CC
> flashSectors=000257AC
> nsectors=00000080
> flash_size=02000000
> flash_address_mask=01FFFFFF
> mach_type ->000000A7
> reset_partitions: partition_table = 0x00000000
> reset_partitions: flashDescriptor = 0x000259CC
> define_partition: base 0x00000000
> define_partition: partition_table 0x00000000
> allocated partition_table
> defining partition: bootldr
> define_partition: base 0x00040000
> define_partition: partition_table 0xC1A00014
> defining partition: root
> initialize_by_mach_type done
> probing ram
> Probing bank0 memory size...
>
> bank0 memory size=04000000
> MDCNFG=B264B267
> dram_size_ptr=00027260
> Probing memory size bank=00000000
> dram[0]=04000000
> mem_size=[i]04000000
> mem_saves[i]=08000000
> mem_size=[i]02000000
> mem_saves[i]=02000000
> mem_size=[i]01000000
> mem_saves[i]=01000000
> maybe mem_size=04000000
> found=
> 04000000
> mem_size[i]=08000000
> mem_saves[i]=30303030
> mem_size[i]=04000000
> mem_saves[i]=08000000
> mem_size[i]=02000000
> mem_saves[i]=02000000
> mem_size[i]=01000000
> mem_saves[i]=01000000
> memory size=04000000
> dram_size_ptr=00027274
> Probing memory size bank=00000001
> dram[0]=C8000C02
> seems to be no dram in bank=00000001
> n_banks=00000001
> dram_sizes[0]=04000000
> dram_sizes[1]=FFFFFFFF
> SDRAM size: 0x04000000
> in megs: 64M
>
>>> Compaq OHH BootLoader, Rev 2-21-12 [BIG_KERNEL] [MONO]
>>> 03-11-11_17:20
>>
>
>>> Last link date: Tue Nov 11 17:20:50 CET 2003
>>> Contact: bootldr_at_handhelds.org
>>
>
> Cpu company: INTEL
> Cpu Architecture: StrongArm
> Cpu Part: SA1110
> processor ID: 6901B119
>
>>> (c) 2000-2001 Compaq Computer Corporation, provided with NO WARRANTY
>>> under the terms of the GNU General Public License.
>>> See http://www.handhelds.org/bootldr/ for full license and
>>> sourcesPress Return to start the OS now, any other key for monitor menu
>>
>
looks like the bootloader is doing something, so did u try pressing "any
other key" right when the bootup starts?

> params_eval: prefix_in =bootldr:
> params_eval: just_show =00000000
> define_partition: base 0x00040000
> define_partition: partition_table 0xC1A00014
> defining partition: throwaway_bootldr_partition
> params_eval_file: tmpPart->base =00040000
> params_eval_file: tmpPart->size =01FC0000
> Scanning all of flash for your JFFS2 convenience. Est Time: 6-12 seconds!
> build_list: max = 01FBFFBC
> ...........................Offset = 00059910
> ...........................
> .....................................................Offset = 00059910
>
> The last to lines loop and nothing I have tried from both my desktop
> and the device will give me the boot prompt before it gets to this
> point (or at all). Does anyone know how to fix this?
>
> -Joe
>
>

since im into jtag right now, i can tell you that there is still a last way

BEni
Received on Sat Apr 15 2006 - 01:39:11 EDT