Re: [jornada] has anyone the sandisk connect plusWIFI successfully working?

From: henner <my-email_at_web.de>
Date: Sat, 01 Oct 2005 07:01:48 +0000

>
>> it is a CF card. A combination of 128MB storage card and a WI-FI
card. I've tried to use with a Jornada568, familiar 0.8.2 and hostap 3.7
- diver & -utils .
>>
>> It has a prism3 chipset and need the hostap_cs driver.
>> I've googled and get the information that it works on open-zaurus
(see: http://www.bentzon.net/acb/sandisk.html)
>> but i found nothing for familiar.
>>
>> When I insert the card I get this messages:
>>
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>>
>> <6> /dev/ide/host0/bus0/target0/lun0:<7>wlan0: hfa384x_cmd: entry
still in list? (entry=c36037a0, type=0, res=0)
>> <7>wlan0: hfa384x_cmd: command was not completed (res=0,
entry=c36037a0, type=0, cmd=0x0121, param0=0xfc00, EVSTAT=427f
INTEN=2020)
>> <4>wlan0: interrupt delivery does not seem to work
>> <7>wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=-110,
rid=fc00, len=2)
>> <7>wlan0: hfa384x_cmd: entry still in list? (entry=c2af0de0, type=0,
res=0)
>> <7>wlan0: hfa384x_cmd: command was not completed (res=0,
entry=c2af0de0, type=0, cmd=0x0001, param0=0x0000, EVSTAT=427f
INTEN=0000)
>> <4>wlan0: interrupt delivery does not seem to work
>> <4>wlan0: MAC port 0 enabling failed
>> <4>wlan0: could not enable MAC port

>This does not look good. Please take in mind that first thing that
needs
>to be "compatibile" is HW not SW. If that works on OZ it means only
that
>wifi chipset could be driven by hostap, but there could be lot of
problems
>on hardware level. And this one seems like this. You maybe can try
newer
>hostap as 0.1.3 is bit old.

thx Adam!!!

hmmmm,

that doesn't sounds good. I use these hostap driver
"hostap-modules-2.6.11-hh1 version 0.3.7-r0 " currently found on
IpkgFind. Wherefrom i can get a newer one?

If i turn back to WinCE and get this card working, does it means that
the HW compatibility is ok? Is there an other way to find out?

Has nobody else tryed to get these card running on the 568-HW?

henner
Received on Sat Oct 01 2005 - 02:59:08 EDT

This archive was generated by hypermail 2.2.0 : Sat Oct 01 2005 - 02:59:13 EDT