Re: [jornada] has anyone the sandisk connect plusWIFI successfully working?

On Fri, 30 Sep 2005, Henner Kessler wrote:

>
> it is a CF card. A combination of 128MB storage card and a WI-FI card. I've tried to use with a Jornada568, familiar 0.8.2 and hostap 3.7 - diver & -utils .
>
> It has a prism3 chipset and need the hostap_cs driver.
> I've googled and get the information that it works on open-zaurus (see: http://www.bentzon.net/acb/sandisk.html)
> but i found nothing for familiar.
>
> When I insert the card I get this messages:
> ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
>
> <6> /dev/ide/host0/bus0/target0/lun0:<7>wlan0: hfa384x_cmd: entry still in list? (entry=c36037a0, type=0, res=0)
> <7>wlan0: hfa384x_cmd: command was not completed (res=0, entry=c36037a0, type=0, cmd=0x0121, param0=0xfc00, EVSTAT=427f INTEN=2020)
> <4>wlan0: interrupt delivery does not seem to work
> <7>wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=-110, rid=fc00, len=2)
> <7>wlan0: hfa384x_cmd: entry still in list? (entry=c2af0de0, type=0, res=0)
> <7>wlan0: hfa384x_cmd: command was not completed (res=0, entry=c2af0de0, type=0, cmd=0x0001, param0=0x0000, EVSTAT=427f INTEN=0000)
> <4>wlan0: interrupt delivery does not seem to work
> <4>wlan0: MAC port 0 enabling failed
> <4>wlan0: could not enable MAC port

This does not look good. Please take in mind that first thing that needs
to be "compatibile" is HW not SW. If that works on OZ it means only that
wifi chipset could be driven by hostap, but there could be lot of problems
on hardware level. And this one seems like this. You maybe can try newer
hostap as 0.1.3 is bit old.

>
> Henner
>

Adam Pribyl
Received on Fri Sep 30 2005 - 15:47:51 EDT