On Thu, 15 Sep 2005, Michael Gernoth wrote:
> On Tue, Sep 13, 2005 at 09:38:36PM +0200, Adam Pribyl wrote:
> > But I can not report success with 2.6.13. It always ends with kernel oops
> > at
> >
> > PC is at timer_dyn_reprogram+0x28/0x68
> > LR is at default_idle+0x40/0x58
>
> Hmm, I need to look into this as soon as I have time again. I think
> I have test-booted 2.6.13 successfully...
>
Without dyn_ticks kernel 2.6.13 works fine.
> > I also found I do see nothing in serial console with kernels booting from
> > linexec (only ------linexec----- and nothing).
> > I am using standard 115200 8N1 no no setup. Due to this I can not post
> > complete output.
>
> Try adding console=ttySA or ttySA0 to the commad-line in params.txt.
> Then you should get more output on the serial port.
>
I still do not have luck to see serial console output with any 2.6 kernel
(2.4 is OK). I tried also handhelds kernel - also shows nothing. It seems
that it is somehow caused by linexec. Is that possible?
> Regards,
> Michael
Adam Pribyl
Received on Tue Sep 20 2005 - 16:50:29 EDT
This archive was generated by hypermail 2.2.0 : Tue Sep 20 2005 - 16:50:38 EDT