Actually we have special machines at work that do 12V and 24V USB, but
not as common as 5V.
As my USB external 2.5" drive comes with a splitter cable, for this
reason (if your drive uses your more than 5V) I might see if 10V is
enough, easy to track the pin outs to the 720 power connector.
Having to carry the cradle would be too much of a pain than just the
power pack.
There is an .AU eBay auction going at present with 2 extended life
batteries, larger than the normal ones.
If I could suspend, even for 10 seconds, I could have used any of my 3
batteries.
BTW, can someone compile a driver for me? 54K in size, this would give
me a 1Mbit wireless connection city wide and interstate.
http://nexus888.homeip.net/nj-iburst-2.4.tar.gz
I need to get another h/drive for my notebook to install everything
rather than running Knoppix diskless, as the home system does not see
the USB card reader under VMware.
Regards,
Tom
-----Original Message-----
From: jornada-bounces_at_handhelds.org
[mailto:jornada-bounces_at_handhelds.org] On Behalf Of Adam Pribyl
Sent: Wednesday, 7 September 2005 11:14 PM
Cc: jornada_at_handhelds.org
Subject: Re: [jornada] USB Charge Cables
On Wed, 7 Sep 2005, Tom Lohdan wrote:
> Does anyone know if it possible or available to buy, USB charge cables
> for the 720?
>
> Not interested so much in Sync'ing, but as I can't change batteries
> running Linux, it would be nice to be able to just top the charge up
as
> I go along at any USB port.
This is not possible.
1. mentioned here - jornadas' DC input is 12V, even though battery is
7.2V
2. there is NO connection between USB and 12V source pin in cradle - USB
connector is only on the cradle. Is that better to carry cradle instead
source adapter?
> Regards,
> Tom
Adam Pribyl
_______________________________________________
jornada mailing list
jornada_at_handhelds.org
https://handhelds.org/mailman/listinfo/jornada
Received on Thu Sep 08 2005 - 05:24:05 EDT
This archive was generated by hypermail 2.2.0 : Thu Sep 08 2005 - 05:24:10 EDT