[jornada] sandisk connectplus wifi card: -wlan0: could not enable MAC port

Hi,

i've tried to run my sandisk connectplus wifi card with hostap_cs driver (hostap-modules-2.6.11_0.3.7-r0_c7x0.ipk) on familiar 0.8.2.

The cardmgr identifies the card correctly. But the card doesn't work. I get following messages when i insert the card:

*********************************************************************************************
<7>Probing IDE interface ide0...
<4>hda: SanDisk SDCFB-256, CFA DISK drive
<4>ide0 at 0xc68a0000-0xc68a0007,0xc68a000e on irq 93
<6>ide-cs: hda: Vcc = 3.3, Vpp = 0.0
<6>hda: max request size: 128KiB
<6>hda: 501760 sectors (256 MB) w/1KiB Cache, CHS=980/16/32
<7>hda: cache flushes not supported
<6> /dev/ide/host0/bus0/target0/lun0: p1
<6> /dev/ide/host0/bus0/target0/lun0: p1
<4>Stopping tasks: =================|
<4>hda: lost interrupt
<4>Restarting tasks... done
<4>Stopping tasks: =================|
<4>hda: lost interrupt
<4>Restarting tasks... done
<7>hostap_crypt: registered algorithm 'NULL'
<6>hostap_cs: 0.1.3 - 2004-02-08 (Jouni Malinen <jkmaline_at_cc.hut.fi>)
<7>hostap_cs: setting Vcc=33 (constant)
<7>hostap_cs: CS_EVENT_CARD_INSERTION
<7>hostap_cs: setting Vcc=33 (from config)
<7>Checking CFTABLE_ENTRY 0x01 (default 0x01)
<7>IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
<7>io->flags = 0x0047, io.base=0x0000, len=128
<7>eth%d: Interrupt, but dev not OK
<6>hostap_cs: index 0x01: Vcc 3.3, irq 93, io 0xc68a0000-0xc68a007f
<6>hostap_cs: Registered netdevice wlan0
<4>hostap_cs: card initialization timed out
<7>Probing IDE interface ide0...
<4>hda: SanDisk SDWCFB-128, CFA DISK drive
<7>wlan0: Host AP mode does not support 'Any' essid
<7>prism2: wlan0: operating mode changed 3 -> 2
<7>wlan0: hfa384x_cmd_issue: cmd reg was busy for 1343 usec
<4>ide0 at 0xc68a0000-0xc68a0007,0xc68a000e on irq 93
<6>hda: max request size: 128KiB
<6>hda: 250880 sectors (128 MB) w/1KiB Cache, CHS=980/8/32
<7>hda: cache flushes not supported

<6> /dev/ide/host0/bus0/target0/lun0:<7>wlan0: hfa384x_cmd: entry still in list? (entry=c36037a0, type=0, res=0)

<7>wlan0: hfa384x_cmd: command was not completed (res=0, entry=c36037a0, type=0, cmd=0x0121, param0=0xfc00, EVSTAT=427f INTEN=2020)

<4>wlan0: interrupt delivery does not seem to work

<7>wlan0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=-110, rid=fc00, len=2)

<7>wlan0: hfa384x_cmd: entry still in list? (entry=c2af0de0, type=0, res=0)

<7>wlan0: hfa384x_cmd: command was not completed (res=0, entry=c2af0de0, type=0, cmd=0x0001, param0=0x0000, EVSTAT=427f INTEN=0000)

<4>wlan0: interrupt delivery does not seem to work
<4>wlan0: MAC port 0 enabling failed
<4>wlan0: could not enable MAC port
*********************************************************************************************

I hope, somebody can help.

Henner
_________________________________________________________________________
Mit der Gruppen-SMS von WEB.DE FreeMail können Sie eine SMS an alle
Freunde gleichzeitig schicken: http://freemail.web.de/features/?mc=021179
Received on Sat Aug 27 2005 - 16:35:15 EDT