You're welcome. I'm curios: what fixed it ?
Daniel
On 8/7/05, Mark Gollahon <golly_at_stellarwerx.com> wrote:
> Thanks! Your message helped me out as well! My J728 was stuck at the HP logo screen, too!
>
> Regards,
> -Mark Gollahon
>
> Daniel Nastase wrote ..
> > That's very strange!
> >
> > Did you try reseting it from the left reset button ?
> > Did you remove any compact flash/pcmcia cards from it ?
> > Try removing the batteries and connecting only to AC power.
> > With all batteries removed try to turn it on (I'm thinking it will
> > drain the power in any capacitors inside).
> > Try sweeping the keyboard gently with your palm a couple of times
> > (maybe a key got stuck)
> >
> > Daniel
> >
> > On 8/7/05, Will Crozier <willjcroz_at_yahoo.co.uk> wrote:
> > > Thanks for the reply daniel!
> > >
> > > But no joy, I have removed all batteries for over 3
> > > hours tried again - no luck.As I'm getting the HP logo
> > > I'm assuming that the ROM isn't fried, maybe its
> > > corrupt although I doubt it. Damn, I was just getting
> > > into playing with my j720 - anyone else got any ideas?
> > >
> > > Many thanks,
> > >
> > > Will Crozier
> > >
> > > > On 8/7/05, Daniel Nastase <dnastase_at_gmail.com>
> > > > wrote:
> > > >
> > > > If it's an original J720 (w/out the flash board)
> > > > there is no way you
> > > > could have damaged it just by copying some files.
> > > > The ROM is always
> > > > safe (provided physical damage happened to it).
> > > > It happens to me too that the WInCE boot process
> > > > gets stuck. I just
> > > > remove the battery (I have only the main battery
> > > > now, I removed the
> > > > backup one a long time ago) and try again. It always
> > > > works the 2nd
> > > > time.
> > > > Just make sure you leave it w/out batteries a
> > > > sufficient long time (5 min).
> > > >
> > > > Daniel
> > > >
> > > > On 8/7/05, Will Crozier <willjcroz_at_yahoo.co.uk>
> > > > wrote:
> > > > > Hello all,
> > > > > I have just tried to transfer a linux kernel and
> > > > > initrd etc to "\My Documents" from compact flash
> > > > using
> > > > > wince. It hung with a few files to go (egg timer
> > > > > frozen) After waiting 10 minutes and no luck I
> > > > decided
> > > > > to do a reset. Now it gets to the HP invent logo
> > > > and
> > > > > is stuck there. I have removed all batteries and
> > > > still
> > > > > no joy. Now I know why its called WINCE!
> > > > >
> > > > > I think I have fried the ROM or something no idea
> > > > how
> > > > > I managed to but it seems properly stuck. Anyone
> > > > else
> > > > > have this trouble? If so please let me know! Maybe
> > > > my
> > > > > only hope is a flashboard!
> > > > >
> > > > > Thanks in advance,
> > > > >
> > > > > Will Crozier
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> > > ___________________________________________________________
> > > How much free photo storage do you get? Store your holiday
> > > snaps for FREE with Yahoo! Photos http://uk.photos.yahoo.com
> > > _______________________________________________
> > > jornada mailing list
> > > jornada_at_handhelds.org
> > > https://handhelds.org/mailman/listinfo/jornada
> > >
> > _______________________________________________
> > jornada mailing list
> > jornada_at_handhelds.org
> > https://handhelds.org/mailman/listinfo/jornada
>
>
Received on Mon Aug 08 2005 - 23:28:12 EDT
This archive was generated by hypermail 2.2.0 : Mon Aug 08 2005 - 23:28:17 EDT