boot> boot booting jffs2... Disabling LCD controller booting boot/zImage from partition >root< Scanning all of flash for your JFFS2 convenience. Est Time: 6-12 seconds! .........................................................................................................................................................................................................................................................................................dir entries = 000002ED frag entries = 00000B0D loaded file of size = 0x00090554 at location 0xC0008000 kernel_magic=E1A00000 kernel_region_words[9]=016F2818 Linux ELF flash_imgstart=50080000 size=00F80000 dest=C0000000 offset=00008000 MMU Control=C19F4071 MMU PIDVAM=00000000 Skipping kernel copy by request. C0008000: E1A00000 C0008004: E1A00000 C0008008: E1A00000 C000800C: E1A00000 C0008010: E1A00000 C0008014: E1A00000 C0008018: E1A00000 C000801C: E1A00000 C0008020: EA000002 C0008024: 016F2818 root_filesystem_name=ramdisk Grabbed linuxargs, argc = 00000001 setting boot parameters to noinitrd root=/dev/mtdblock/2 init=/linuxrc console=ttySA0 get_param: could not find parameter system_rev Setting up Linux parameters at address=C0000100 TSK! ramdisk_region is NULL!!! using_ramdisk=00000001 initrd_start=346C7466 dram_size=04000000 nr_pages=00004000 command line is: noinitrd root=/dev/mtdblock/2 init=/linuxrc console=ttySA0 linuxEntryPoint=C0008000 Booting Linux image Uncompressing Linux............................................. done, booting the kernel. Linux version 2.4.7-rmk3-np1-devfs (root@step) (gcc version 2.95.4 20010810 (Debian prerelease)) #1 Thu Sep 6 21:11:06 PDT 2001 Processor: Intel StrongARM-1110 revision 8 Architecture: Compaq iPAQ On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: noinitrd root=/dev/mtdblock/2 init=/linuxrc console=ttySA0 Warning: uninitialized Real Time Clock Console: colour dummy device 80x30 Calibrating delay loop... 137.21 BogoMIPS Memory: 64MB = 64MB total Memory: 62912KB available (1161K code, 266K data, 60K init) Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket CPU clock: 206.400 MHz (max 206.400 MHz) Starting kswapd v1.8 devfs: v0.107 (20010709) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x2 JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. dma period = 1398056 ps dma period = 1398056 ps Console: switching to colour frame buffer device 40x30 sa1100fb_setup_gpio 'mask' for GPIO is 3fc pty: 256 Unix98 ptys configured block: queued sectors max/low 41565kB/13855kB, 128 slots per queue SA1100 flash: probing 32-bit flash bus SA1100 flash: Found 2 x16 devices at 0x0 in 32-bit mode parse_bootldr_partitions: partition_table_offset=0x40000 parse_bootldr_partitions: magic=0x646c7470 parse_bootldr_partitions: npartitions=0x3 partition bootldr o=0 s=40000 partition params o=40000 s=40000 partition root o=80000 s=0 Using Compaq bootldr partition definition Creating 3 MTD partitions on "SA1100 flash": 0x00000000-0x00040000 : "bootldr" mtd: Giving out device 0 to bootldr 0x00040000-0x00080000 : "params" mtd: Giving out device 1 to params 0x00080000-0x01000000 : "root" mtd: Giving out device 2 to root NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) IPv4 over IPv4 tunneling driver sa1100fb_setup_gpio 'mask' for GPIO is 3fc GRE over IPv4 tunneling driver Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Fast Floating Point Emulator V0.0 (c) Peter Teichmann. NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com mtdblock_open ok VFS: Mounted root (jffs2 filesystem). Mounted devfs on /dev Freeing init memory: 60K Executing Mercury demo /linuxrc... Loading floating point emulator... insmod: nwfpe: no module by that name found Mounting /proc Loading Unix socket support insmod: unix: no module by that name found Setting up RAMFS, please wait... insmod: ramfs: no module by that name found Setting up some devices modprobe: Can't open dependencies file /lib/modules/2.4.7-rmk3-np1-devfs/modules.dep (No such file or directory) Setting Date/Time from previous settings Mon Jan 1 00:00:00 UTC 2001 Executing /sbin/init... INIT: version 2.78 booting Mounting local filesystems... mount: ramfs already mounted on /mnt/ramfs devpts on /dev/pts type devpts (rw,mode=0622) mount: proc already mounted Calculating module dependencies... done. Loading modules: apm h3600_init_module:init_module registering char device init_module successful init major= 254 irq=15 h3600_flite_control: pwr=1 brightness=25 ready=0 h3600_init_module registered pm callback=c486979c apm: BIOS version 1.2 Flags 0x02 (Driver version 1.13) h3600_ts sa1100-rtc SA1100 Real Time Clock driver v1.00 h3600-sleeve init_module successful init major= 0 irq=48 run_sbin_hotplug:75 * hotplug_path=/sbin/hotplug h3600_sleeve_eject-9- sleeve_dev->driver=00000000 sleeve removed h3600_generic_sleeve Linux Kernel Card Services 3.1.22 options: [pm] SA-1100 PCMCIA (CS release 3.1.22) sa1100_bitsy_common_pcmcia_get_irq_info sa1100_bitsy_common_pcmcia_get_irq_info sa1100: initialization complete h3600_generic_pcmcia_init_module: registering sleeve drivers Setting the System Clock using the Hardware Clock as reference... Cannot access the Hardware Clock via any known method. Use the --debug option to see the details of our search for an access method. INIT: Entering runlevel: 2 Configuring network interfaces: done. Starting PCMCIA services: modulesinsmod: a module named pcmcia_core already exists insmod: a module named sa1100_cs already exists cardmgr. /etc/rc2.d/S20hotplug: /etc/hotplug/sleeve.rc: not found cardmgr[79]: starting, version is 3.1.20 cardmgr[79]: watching 2 sockets cardmgr[79]: Card Services release does not match familiar login: root Password: PAM_unix[84]: (login) session opened for user root by LOGIN(uid=0) login[84]: ROOT LOGIN on `ttySA0' # ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) # h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=0 h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=1 h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=0 cardmgr[79]: initializing socket 0 cardmgr[79]: socket 0: NE2000 Compatible Fast Ethernet cardmgr[79]: executing: 'modprobe 8390' cardmgr[79]: executing: 'modprobe pcnet_cs' h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=0 reset=0 h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=0 reset=0 eth0: NE2000 (DL10022 rev 30): io 0xf6000300, irq 42, hw_addr 00:E0:98:8B:04:CC cardmgr[79]: executing: './network start eth0' # eth0: MII is missing! # NETDEV WATCHDOG: eth0: transmit timed out # eth0: Too much work at interrupt, status 0x22 h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=0 h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=1 h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=0 # # cs: socket c02d9800 timed out during reset. Try increasing setup_delay. # eth0: timeout waiting for Tx RDC. eth0: pcnet_reset_8390() did not complete. #