familiar login: root Password: ~ # dmesg Linux version 2.4.19-rmk6-pxa1-hh30 (jamey@vimes.crl.hpl.hp.com) (gcc version 3.2.3) #3 Wed Nov 12 11:07:41 EST 2003 CPU: StrongARM-1110 revision 8 Machine: HP iPAQ H3600 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: mtdparts=ipaq:0x00040000@0x00000000(bootldr)ro,0x00FC0000@0x00040000(root) root=/dev/mtdblock1 init=/linuxrc noinitrd console=none rootfstype=jffs2 Relocating machine vectors to 0xffff0000 Console: colour dummy device 80x30 Calibrating delay loop... 137.21 BogoMIPS Memory: 32MB = 32MB total Memory: 30908KB available (1090K code, 304K data, 68K init) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket CPU clock: 206.400 MHz (59.000-287.000 MHz) sa1110_clk_init: h3xxx_membank_size[0]=33554432 sa1110_clk_init: 100 MHz Samsung 4Mx16bitx4banks SDRAM SDRAM: tck: 10 trcd: 20 trp: 30 twr: 30 refresh: 64000 cas_latency: 3 MDCNFG: 33013355 MDREFR: 00302007 MDCAS0: aaaaaa9f MDCAS1: aaaaaaaa MDCAS2: aaaaaaaa new dri value = 12 Starting kswapd devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc. ttySA%d0 at MEM 0x80050000 (irq = 17) is a SA1100 dma period = 1398056 ps, clock = 206400 kHz dma period = 1398056 ps, clock = 206400 kHz Console: switching to colour frame buffer device 40x30 iPAQ H3600 keyboard driver v1.0.1 pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize iPAQ flash: probing 32-bit flash bus, window=c28c0000 with CFI. IPAQ flash bank 1: Found an alias at 0x1000000 for the chip at 0x0 IPAQ flash bank 1: Found an alias at 0x2000000 for the chip at 0x0 IPAQ flash bank 1: Found an alias at 0x3000000 for the chip at 0x0 cfi_cmdset_0001: Erase suspend on write enabled 0: offset=0x0,size=0x40000,blocks=64 Using buffer write method iPAQ flash: found 16777216 bytes iPAQ flash: probing 32-bit flash bus, window=c68d0000 with CFI. CFI: Found no IPAQ flash bank 2 device at location zero iPAQ flash: probing 32-bit flash bus, window=c68d0000 with JEDEC. kmod: failed to exec /sbin/modprobe -s -k jedec_probe, errno = 2 iPAQ flash: failed to find flash. 2 cmdlinepart partitions found on MTD device ipaq Using dynamic partition definition Creating 2 MTD partitions on "ipaq": 0x00000000-0x00040000 : "bootldr" mtd: Giving out device 0 to bootldr 0x00040000-0x01000000 : "root" mtd: Giving out device 1 to root NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 2048) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com mtdblock_open ok VFS: Mounted root (jffs2 filesystem). Mounted devfs on /dev Freeing init memory: 68K Warning: unable to open an initial console. H3600 Registering HAL abstraction layer h3600_micro_setup: setting up microcontroller interface iPAQ audio support initialized BlueZ Core ver 2.2 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky BlueZ HCI UART driver ver 2.1 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky BlueZ L2CAP ver 2.1 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky BlueZ BNEP ver 1.0 Copyright (C) 2001,2002 Inventel Systemes Written 2001,2002 by Clement Moreau Written 2001,2002 by David Libault Copyright (C) 2002 Maxim Krasnyanskiy apm: BIOS version 1.2 Flags 0x02 (Driver version 1.13) h3600_ts_init_module: registering char device IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver irda_init() IrCOMM protocol (Dag Brattli) SA1100 Real Time Clock driver v1.03 SA1100 USB Controller Core Initialized h3600_sleeve_insert: unrecognized sleeve vendor=0x1125 device=0x0001 usbctl: Opened for usb-eth usbctl: Started for usb-eth Linux Kernel Card Services 3.1.22 options: [pm] <6>SA-1100 PCMCIA (CS release 3.1.22) installing h3600_pcmcia_ops sa1100_pcmcia_driver_init: pcmcia_low_level=cab02a3c sa1100_pcmcia_driver_init: skt=0 skt->virt_io=cab10000 sa1100_pcmcia_driver_init: skt=1 skt->virt_io=cab30000 sa1100_pcmcia_driver_init: done Serial driver version 5.05c (2001-07-08) with no serial options enabled dma period = 1398056 ps, clock = 206400 kHz dma period = 1398056 ps, clock = 206400 kHz dma period = 1398056 ps, clock = 206400 kHz hostap_crypt: registered algorithm 'NULL' hostap_cs: 0.0.4 - 2003-07-27 (Jouni Malinen ) hostap_cs: setting Vcc=33 (constant) hostap_cs: CS_EVENT_CARD_INSERTION prism2_config() hostap_cs: ignoring Vcc=50 (from config) Checking CFTABLE_ENTRY 0x01 (default 0x01) IO window settings: cfg->io.nwin=1 dflt.io.nwin=1 io->flags = 0x0046, io.base=0x0000, len=64 : Interrupt, but dev not OK hostap_cs: index 0x01: Vcc 5.0, irq 32, io 0xcab30000-0xcab3003f hostap_cs: Registered netdevice wlan0 prism2_hw_init() hostap_cs: card initialization timed out prism2: wlan0: operating mode changed 3 -> 1 ~ #