U3
@000003A4
F02000000

*MTST
00000001
00000002
00000004
00000008
00000010
00000020
00000040
00000080
00000100
00000200
00000400
00000800
00001000
00002000
00004000
00008000
00010000
00020000
00040000
00080000
00100000
00200000
00400000
00800000
01000000
02000000
04000000
08000000
10000000
20000000
40000000
80000000
ENDM
STKP
C19F3FFC
MMU table start=C19F4000
Boot data start=C19F8000
Boot data size=00008000
Stack data base=C19F0000
Stack data size=00004000
FLASH_BASE=00000000
 Evacuating 1MB of Flash to DRAM at: C1E00000
done
Map Flash virtual section to DRAM at: C1E00000
verify flash size...
btflash_init: mfrid=00890089
  devid=00180018
walking flash descriptors (2x16)
btflash_init: found flash 28F128J3A
  flashDescriptor=00021184
  flashSectors=00020F64
  nsectors=00000080
  flash_size=02000000
  flash_address_mask=01FFFFFF
allocated partition_table
defining partiton: bootldr
defining partiton: root
Probing memory size...
SDRAM size: 0x02000000
 in megs: 32M
Disabling LCD controller
Disabling LCD controller
Enabling LCD controller
before EN
after EN
after EGPIO
DBAR1=C1E29ED0
LCCR0=000000B9
LCCR1=0B100930
LCCR2=0A0108F0
LCCR3=00300010
params=0x00021578
>> Compaq OHH BootLoader, Rev 2-16-19 [BIG_KERNEL] [MONO]
>> Last link date: Fri Nov  2 14:26:22 EST 2001
>> Contact: bootldr@handhelds.org

>>  ARM Processor Rev=6901B118
>> (c) 2000 Compaq Cambridge Research Laboratory
Press Return to start the OS now, any other key for monitor menu
DEBUG BOOT: not evaluating params
DEBUG BOOT: use `params eval' to evaluate parameters.
boot> boot wince
booting wince...
Disabling LCD controller