%* @000002BC F *MTST 00000001 00000002 00000004 00000008 00000010 00000020 00000040 00000080 00000100 00000200 00000400 00000800 00001000 00002000 00004000 00008000 00010000 00020000 00040000 00080000 00100000 00200000 00400000 00800000 01000000 02000000 04000000 08000000 10000000 20000000 40000000 80000000 ENDM STKP C19F3FFC MMU table start=C19F4000 Boot data start=C19F8000 Boot data size=00008000 Stack data base=C19F0000 Stack data size=00004000 FLASH_BASE=00000000 Evacuating 1MB of Flash to DRAM at: C1E00000 done Map Flash virtual section to DRAM at: C1E00000 btflash_init: mfrid=00890089 devid=00170017 walking flash descriptors btflash_init: found flash 28F640J3A flashDescriptor=0000D174 flashSectors=0000D070 nsectors=00000040 flash_size=01000000 flash_address_mask=00FFFFFF dram_size: 02000000 >> Compaq OHH BootLoader, Rev 02.09.05 >> 00-09-08_17:21 >> ARM Processor Rev=6901B116 >> CPSR=600000D3 >> (c) 2000 Compaq Cambridge Research Laboratory Press Return to start the OS now, any other key for monitor menu eval param blk + set copy_ramdisk 0x00000001 setting param=copy_ramdisk to value=0x00000001 + set linuxargs "initrd root=/dev/flash4 ramdisk_size=8192 console=0" setting param=linuxargs to value=initrd root=/dev/flash4 ramdisk_size=8192 console=0 booting flash... boot_magic=5A5ABEEF kernel_image_first_word=E1A00000 Linux ELF flash_imgstart=5004000C size=00077B80 dest=C0000000 offset=00008000 MMU Control=C19F4071 copying Linux kernel ... done linuxEntryPoint: C0008000 kernel_image_dest: C0000000 kernel_image_offset: 00008000 C0008000: E1A00000 C0008004: E1A00000 C0008008: E1A00000 C000800C: E1A00000 C0008010: E1A00000 C0008014: E1A00000 C0008018: E1A00000 C000801C: E1A00000 C0008020: EA000001 C0008024: 016F2818 Copying compressed ramdisk from 00100004 to C11F0000...Done root_filesystem_name=ramdisk argc=00000002 args=initrd root=/dev/flash4 ramdisk_size=8192 console=0 setting boot parameters first_word_of_ramdisk=0024BD00 Setting up Linux parameters at address=C0000100 using_ramdisk=00000001 initrd_start=C11F0000 dram_size=02000000 nr_pages=00002000 command line is: initrd root=/dev/flash4 ramdisk_size=8192 console=0 linuxEntryPoint=C0008000 Booting Linux image Uncompressing Linux...................................... done, booting the kernel. $PA16-Linux version 2.4.0-test6-rmk5-np2-64mb (jamey@highwind.crl.dec.com) (gcc version 2.95.2 19991024 (release)) #17 Thu Sep 7 14:41:31 EDT 2000 Processor: Intel StrongARM-1110 revision 6 machine_arch_type=22 Architecture: Compaq Bitsy On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: initrd root=/dev/flash4 ramdisk_size=8192 console=0 Console: colour dummy device 80x30 Calibrating delay loop... 180.22 BogoMIPS Memory: 32MB = 32MB total Memory: 28548KB available (945K code, 305K data, 60K init) Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 2048 (order: 2, 16384 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 2048 bind 2048) Initializing RT netlink socket Starting kswapd v1.7 Console: switching to colour frame buffer device 40x30 pty: 256 Unix98 ptys configured rd_init RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Flash CFI Info: **************************** manufacturer_code = 0x89 (0x89) device_code = 0x17 (0x17) cfi_ident = QRY is_cfi_supported = 1 device_size = 0x17 (8388608 bytes, 8 MB, 64 Mb) max_write_buffer_size = 5 (32 bytes) num_erase_block_regions = 1 num_erase_blocks_r1 = 0x3f (63 blocks) size_erase_blocks_r1 = 0x200 (131072 bytes) FLASH Driver: using 28F640J3A devices FLASH driver initialized RAMDISK: Compressed image found at block 0 Freeing initrd memory: 2351K SA1100 serial driver version 1.3 ttyS0 on SA1100 UART3 (irq 17) ttyS1 on SA1100 UART1 (irq 15) ttyS2 on SA1100 UART2 (irq 16), using IRDA NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com VFS: Mounted root (ext2 filesystem). LINUX RC is executing LINUX RC is executing before mount /linuxrc: 8: Syntax error: Bad substitution VFS: Mounted root (cramfs filesystem). change_root: old root has d_count=4 Freeing init memory: 60K INIT: version 2.76 booting Fast boot, no file system check Calculating module dependencies... depmod: Can't open /lib/modules/2.4.0-test6-rmk5-np2-64mb/modules.dep done. Loading modules: h3650_ts modprobe: Can't open dependencies file /lib/modules/2.4.0-test6-rmk5-np2-64mb/modules.dep (No such file or directory) sa1100-uda1341 modprobe: Can't open dependencies file /lib/modules/2.4.0-test6-rmk5-np2-64mb/modules.dep (No such file or directory) rm: cannot unlink `/fastboot': Read-only file system Mounting local file systems... mke2fs 1.14, 9-Jan-1999 for EXT2 FS 0.5b, 95/08/09 Linux ext2 filesystem format Filesystem label= 2048 inodes, 8192 blocks 409 blocks (4.99%) reserved for the super user First data block=1 Block size=1024 (log=0) Fragment size=1024 (log=0) 1 block group 8192 blocks per group, 8192 fragments per group 2048 inodes per group Writing inode tables: 0/1done Writing superblocks and filesystem accounting information: done /initrd/dev/ram1 on /initrd type ext2 (rw) /initrd/dev/flash5 on /usr type cramfs (ro) none on /initrd/dev/pts type devpts (rw,mode=0622EXT2-fs: unable to read superblock ) mount: wrong fs type, bad option, bad superblock on /dev/flash6, or too many mounted file systems (aren't you trying to mount an extended partition, instead of some logical partition inside?) hostname: can't open `/etc/hostname' SKIFF: skipping hwclock adjustment SKIFF: hwclock --adjust --utc SKIFF: hwclock --hctosys --utc Local time: Wed Dec 31 19:00:07 EST 1969 Cleaning: /tmp /var/lock /var/run. Initializing random number generator... done. Recovering nvi editor sessions... done. INIT: Entering runlevel: 3 Starting inetd: inetd. Starting portmap: portmap. Starting X demonstration modprobe: modprobe: Can't open dependencies file /lib/modules/2.4.0-test6-rmk5-np2-64mb/modules.dep (No such file or directory) modprobe: modprobe: Can't open dependencies file /lib/modules/2.4.0-test6-rmk5-np2-64mb/modules.dep (No such file or directory) modprobe: modprobe: Can't open dependencies file /lib/modules/2.4.0-test6-rmk5-np2-64mb/modules.dep (No such file or directory) modprobe: modprobe: Can't open dependencies file /lib/modules/2.4.0-test6-rmk5-np2-64mb/modules.dep (No such file or directory) Touch screen not found. : No such device Error: Can't open display: unix:0 xcalibrate: calibrate.c:367: initX: Assertion `dpy' failed. /etc/rc3.d/S40xdemo: line 47: 75 Aborted ./xcalibrate ./xsetroot: unable to open display 'unix:0' ./xrdb: Connection refused ./xrdb: Can't open display 'unix:0' Error: Can't open display: unix:0 Starting PCMCIA services:./twm: unable to open display "unix:0" module directory /lib/modules/2.4.0-test6-rmk5-np2-64mb/pcmcia not found. Error: Can't open display: unix:0 Handhelds Linux v0.11 (none) ttyS0 (none) login: