Re: [iPAQ] cardctl ident not working

Todd Bowman wrote:
>
> Last week I posted a similar message reporting that cardctl did not
> report any card info for Orinoco gold card. Since then I have upgraded
> my 3135 to fam 0.5 and the latest kernel. "cardctl ident" still reports
> no info for the orinoco plus a 3com wireless, cisco wireless and a 3com
> 10/100. I do however get a report for my Kingston CF with adapter (it
> timesout though, but that is a later issue). I think I am missing
> something very simple but cannot figure it out.
>
Do you use the familiar pcmcia tools? They have a version number of
3.1.20.
On a familiar v0.4 I can use the 3Com AirConnect card, but I use a
version 3.1.22 now. You also need
the file hermes.conf in /etc/pcmcia. I do have the pcmcia-3.1.22
compiled for the iPaq, perhaps you could try it to see if it gives the
same problem. (I am guessing here, that it might having to do with the
pcmcia being to old for the current kernel. But I'm not sure it will
help).

> Here are few reports from bootup:
>
> ...
> h3600_sleeve_insert: vendorid=0x1125 devid=0xd7c3
> h3600_sleeve_insert: unrecognized sleeve // Is this a
> problem, or is it taken care of
> // below with
> sleeve_register_driver
> ...
> h3600_sleeve_register_driver: registered a driver that matches the
> current sleeve Compaq PC Card Sleeve
> bitsy-uda1341 modprobe: Can't locate module bitsy-uda1341 // Is this a
> related problem?
> ...
>
> lsmod:
> Module Size Used by
> ds 7856 2
> h3600_generic_sleeve 3056 0 (unused)
> sa1100_cs 9392 2 [h3600_generic_sleeve]
> pcmcia_core 35728 0 [ds sa1100_cs]
> h3600-sleeve 4608 0 [h3600_generic_sleeve]
> sa1100-rtc 5984 0
> apm 3648 0 (unused)
> h3600_micro 10800 0 (autoclean) (unused)
> h3600_ts 9072 0 [h3600-sleeve apm h3600_micro]
>
> Any help is appreciated.
>
> Thanks,
> Todd
> _______________________________________________
> iPAQ mailing list
> iPAQ@handhelds.org
> http://handhelds.org/mailman/listinfo/ipaq
> irc://irc.openprojects.net #ipaq
Received on Thu Oct 11 23:39:07 2001