[iPAQ] The "new" iPAQ suspend button behaviour

Hi,

I have a few questions about the new suspend button behaviour.
First I find it good that a longer press toggles the backlight and a
short suspends/resumes.

But I discovered a problem when resuming. The first time the LCD comes
back and just disapeard immediately (suspend again). Only after the
second button press it works.

Any ideas?
I did not change any values in /proc/sys/ts/*

>3. On a suggestion from Sean Godsell, the power button now serves
>double
>duty. If it is held down for less than
>"/proc/sys/ts/suspend_button_delay" milliseconds, the backlight is
>toggled on and off. If it is held down for a longer time, it
>suspends/resumes the iPAQ. As before, if you "echo '1' >
>/proc/sys/ts/suspend_button_mode", you turn off the suspend functions
>and the power button acts just as a regular button.

Regards

Max

-- 
_______________________________________________________________
     \                  
    o/\_          DI Max Weninger
   <\__,\         Email (max@takefive.co.at)          
    ">.  |         
     ` .-|        Jakob-Haringer-Str. 8
        . \       A-5020 Salzburg - AUSTRIA
         . \      Tel: +43 662 4579150 - Fax: +43 662 4579156
         .-|      
_________._|____________________________________________________