RE: [iPAQ] PROBLEM WITH ORINOCO CARD

With the latest v0.5pre, I just power on my IPAQ and when the system is loaded,
plugged the PCMCIA sleeve and then the PCMCIA card (a Cisco 350).
In that way the card is recognized.
I've never had problem with an Lucent Silver.
Hope it will help you.

yk

En réponse à "Hicks, Jamey" <Jamey.Hicks@compaq.com>:

>
> I am having the same problem with WLAN cards and the single pcmcia
> sleeve. I do not know what is causing it and I have not been able to
> fix it.
>
> The WL110 card is the same card as the Lucent Gold card.
>
> Jamey
>
>
> > -----Original Message-----
> > From: Erkki Harjula [mailto:erkkih@ees2.oulu.fi]
> > Sent: Tuesday, October 09, 2001 8:44 AM
> > To: ipaq@handhelds.org
> > Subject: [iPAQ] PROBLEM WITH ORINOCO CARD
> >
> >
> >
> > I installed Familiar 0.5 on my iPaq, everything works well,
> > but I can't get
> > wlan card work. Card is Orinoco gold. Here's the message that
> > I get when I
> > switch the card on to iPaq:
> >
> > --------------------------------------------------------------
> > -------------
> > sh-2.03# h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50
> > vpp=50 reset=0
> > h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50
> > vpp=50 reset=1
> > h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50
> > vpp=50 reset=0
> > cardmgr[83]: initializing socket 0
> > cardmgr[83]: socket 0: Compaq WL110 PC Card
> > cardmgr[83]: executing: 'modprobe wvlan_cs'
> > wvlan_cs: WaveLAN/IEEE PCMCIA driver v1.0.6
> > wvlan_cs: (c) Andreas Neuhaus <andy@fasta.fh-dortmund.de>
> > h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50
> > vpp=0 reset=0
> > h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50
> > vpp=0 reset=0
> > wvlan_cs: index 0x01: Vcc 5.0, irq 42, io 0xf6000000-0xf600003f
> > wvlan_cs: Registered netdevice eth0
> > wvlan_cs: MAC address on eth0 is 00 00 00 00 00 00
> > wvlan_cs: Initialization failed!
> > cardmgr[83]: executing: './network start eth0'
> > NETDEV WATCHDOG: eth0: transmit timed out
> > wvlan_cs: eth0 Tx timed out! Resetting card
> > wvlan_cs: MAC address on eth0 is 00 00 00 00 00 00
> > wvlan_cs: Initialization failed!
> > NETDEV WATCHDOG: eth0: transmit timed out
> > wvlan_cs: eth0 Tx timed out! Resetting card
> > wvlan_cs: MAC address on eth0 is 00 00 00 00 00 00
> > wvlan_cs: Initialization failed!
> >
> > ...
> >
> > NETDEV WATCHDOG: eth0: transmit timed out
> > wvlan_cs: eth0 Tx timed out! Resetting card
> > wvlan_cs: MAC address on eth0 is 00 00 00 00 00 00
> > wvlan_cs: Initialization failed!
> > cardmgr[83]: + Operation failed.
> > --------------------------------------------------------------
> > -------------
> >
> > It seems to recognize the card as Compaq WL110 when it should
> > be Lucent
> > Orinoco Gold. With familiar 0.4 everything worked well on
> > this same device.
> > I feel quite frustrated, when I have installed every pcmcia any wlan
> > modules over and nothing seems to help.
> >
> > Regards,
> > Erkki
> >
> > _______________________________________________
> > iPAQ mailing list
> > iPAQ@handhelds.org
> > http://handhelds.org/mailman/listinfo/ipaq
> > irc://irc.openprojects.net #ipaq
> >
> _______________________________________________
> iPAQ mailing list
> iPAQ@handhelds.org
> http://handhelds.org/mailman/listinfo/ipaq
> irc://irc.openprojects.net #ipaq
>
Received on Tue Oct 9 10:08:49 2001