Re: [iPAQ] PROBLEM WITH ORINOCO CARD

Hello Erkki,

modprobe orinoco_cs ignore_cis_vcc=1

should do the trick, with orinoco_cs version 0.07.

Best Regards,

--George

On Tuesday 09 October 2001 08:43, Erkki Harjula wrote:
> I installed Familiar 0.5 on my iPaq, everything works well, but I can't get
> wlan card work. Card is Orinoco gold. Here's the message that I get when I
> switch the card on to iPaq:
>
> ---------------------------------------------------------------------------
> sh-2.03# h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50
> vpp=50 reset=0
> h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=1
> h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=0
> cardmgr[83]: initializing socket 0
> cardmgr[83]: socket 0: Compaq WL110 PC Card
> cardmgr[83]: executing: 'modprobe wvlan_cs'
> wvlan_cs: WaveLAN/IEEE PCMCIA driver v1.0.6
> wvlan_cs: (c) Andreas Neuhaus <andy@fasta.fh-dortmund.de>
> h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=0 reset=0
> h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=0 reset=0
> wvlan_cs: index 0x01: Vcc 5.0, irq 42, io 0xf6000000-0xf600003f
> wvlan_cs: Registered netdevice eth0
> wvlan_cs: MAC address on eth0 is 00 00 00 00 00 00
> wvlan_cs: Initialization failed!
> cardmgr[83]: executing: './network start eth0'
> NETDEV WATCHDOG: eth0: transmit timed out
> wvlan_cs: eth0 Tx timed out! Resetting card
> wvlan_cs: MAC address on eth0 is 00 00 00 00 00 00
> wvlan_cs: Initialization failed!
> NETDEV WATCHDOG: eth0: transmit timed out
> wvlan_cs: eth0 Tx timed out! Resetting card
> wvlan_cs: MAC address on eth0 is 00 00 00 00 00 00
> wvlan_cs: Initialization failed!
>
> ...
>
> NETDEV WATCHDOG: eth0: transmit timed out
> wvlan_cs: eth0 Tx timed out! Resetting card
> wvlan_cs: MAC address on eth0 is 00 00 00 00 00 00
> wvlan_cs: Initialization failed!
> cardmgr[83]: + Operation failed.
> ---------------------------------------------------------------------------
>
> It seems to recognize the card as Compaq WL110 when it should be Lucent
> Orinoco Gold. With familiar 0.4 everything worked well on this same device.
> I feel quite frustrated, when I have installed every pcmcia any wlan
> modules over and nothing seems to help.
>
> Regards,
> Erkki
>
> _______________________________________________
> iPAQ mailing list
> iPAQ@handhelds.org
> http://handhelds.org/mailman/listinfo/ipaq
> irc://irc.openprojects.net #ipaq
Received on Tue Oct 9 06:49:55 2001