RE: [iPAQ] jffs2 data crc failed, missing modules.dep in pre-0.5

Thanks, but even if I turn off LCD (lcdoff), I still don't get a stable
bootstrap-version running on my ipaq?!
The jffs problems occur again, but less frequently...
Neither the 0.4, nor the 0.5 version are running on my ipaq.

v0.4: "depmod" is damaged and I get a segfault.
v0.5: pcmcia-cards don't work. Sometimes the driver is recognized and I'm
able to type "ifconfig", but the MAC is 0:0:0:0:0... or I get no link,...

I followed the instructions step by step, checked the md5 sums, used the
correct bootldr,...
I tried a modified USB-cradle and a original serial cradle. I tried
different hosts. I tried
hyperterm and minicom. In minicom, I get thousands of
"Retry 0: NAK on sector" during xmodem-upload. Is this a problem?

By the way, I have a H3660, is there a major difference to the H3600?

thanx for any advice,

Kilian

On Thu, 20 Sep 2001, Richard Deeming wrote:

> Andrew Diller provided me with this and it really was my problem.
>
> Sounds like you are having the same issues.
>
> turn your lcd off.
> the heat screws up the download.
> from bootloader:
> lcdoff
>
> Rich Deeming
>
>
> -----Original Message-----
> From: Kilian Weniger [mailto:weniger@tm.uni-karlsruhe.de]
> Sent: Thursday, September 20, 2001 2:23 AM
> To: ipaq@handhelds.org
> Subject: [iPAQ] jffs2 data crc failed, missing modules.dep in pre-0.5
>
> >jffs2_scan_inode_node(): Data CRC failed on node at 0x00254c0c: Read
> 0x503833aa, calculated 0x0e73a6ea
>
>

-- 
----------------------------------------------------------------------------------------
Dipl.-Ing. Kilian Weniger           phone: (+49)(0)721-608 6415
Institute of Telematics             fax:   (+49)(0)721-388097
Department of Computer Science      email: weniger@tm.uni-karlsruhe.de
University of Karlsruhe 	    homepage: http://www.tm.uka.de/~weniger/
D-76128 Karlsruhe