[iPAQ] Networking setup - 2

I forgot to say thai I've also installed Konqueror Embedded
browser...

----------------------------------------------------
Maurizio Megliola
TXT e-solutions S.p.a.
Tel.: +39.010.3536634
GSM: +39.348.5234949
email: maurizio.megliola@txt.it
web: http://www.txt.it
-----------------------------------------------------

  ----- Original Message -----
  From: Maurizio Megliola
  To: familiar@handhelds.org
  Cc: ipaq@handhelds.org
  Sent: Friday, September 07, 2001 1:29 PM
  Subject: [Familiar] Networking setup

  Hi, thanks to all those of us who helped me!
  At now, on my iPAQ I've installed Familiar Linux 0.4
  with Qt Palmtop versiopn 1.3.1 .

  Next step is to enable Internet networking:
  on web installation guide, I cannot found many information,
  so I still need your kind feedback!
  I've a Compaq WL 100 Wireless PC Card.
  When inserting it into iPAQ slot, my terminal writes:

  bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=0
  bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=1
  bitsy_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=0
  cardmgr[59]: initializing socket 0
  cardmgr[59]: socket 0: Compaq WL100 11Mb/s WLAN Card
  cardmgr[59]: executing: 'modprobe prism2_cs'
  cardmgr[59]: + modprobe: Can't locate module prism2_cs
  cardmgr[59]: modprobe exited with status 255
  cardmgr[59]: module /lib/modules/2.4.3-rmk2-np1/pcmcia/prism2_cs.o not available

  cardmgr[59]: get dev info on socket 0 failed: Resource temporarily unavailable

  Where can I find the needed modules?
  And, please what are the full settings to configure my iPAQ to go to Internet?
  Thanks in advance,
  Maurizio
Received on Fri Sep 7 04:12:01 2001