[iPAQ] CF Memory using 0.16-Beta (Newbie)

Hi,

I've just upgraded from V0.15 to V0.16-beta hoping this version would get my
CF memory working.

Is CF memory supported yet? if so any pointers to get working. ftl_format??
I have 64mb Compaq CF card.

When I insert the card I get the following:

bitsy_pcmcia_configure_socketvcc=33 reset=0
bitsy_pcmcia_configure_socketvcc=33 reset=1
bitsy_pcmcia_configure_socketvcc=33 reset=0
cardmgr[104]: initializing socket 0
cardmgr[104]: socket 0: ATA/IDE Fixed Disk
(none):/# cardmgr[104]: executing: 'modprobe ide-cs'
cardmgr[104]: + modprobe: Can't locate module ide-cs
cardmgr[104]: modprobe exited with status 255
cardmgr[104]: executing: 'insmod
/lib/modules/2.4.0-test8-rmk2-np2/pcmcia/ide-cs
.o'
cardmgr[104]: + /lib/modules/2.4.0-test8-rmk2-np2/pcmcia/ide-cs.o:
unresolved sy
mbol ide_unregister
cardmgr[104]: + /lib/modules/2.4.0-test8-rmk2-np2/pcmcia/ide-cs.o:
unresolved sy
mbol ide_register
cardmgr[104]: insmod exited with status 1
cardmgr[104]: get dev info on socket 0 failed: Resource temporarily
unavailable

When I do a card ID I get the following: Strange?

(none):/# cardctl ident
Socket 0:
  product info: "SunDisk", "SDP", "5/3 0.6"
  manfid: 0x0045, 0x0401
  function: 4 (fixed disk)
Socket 1:
  no product info available
Received on Wed Sep 27 01:59:13 2000