Re: [iPAQ] problems after instaling familiar 0.4:

On Tuesday 12 June 2001 01:03, T. V. Raman wrote:
> Hi--
> I got familiar 0.4
> up and running, and I can bring up the ppp
> link between the ipaq and my desktop
> , but rlogin isn't on the machine, nor is
> ftp, nor xterm, so I'm at a loss as to how to do anything with the machine
> other than connect to it with minicom; I also can't find any sort of file
> transfer programs on the ipaq (I thought I could install the necessary
> pieces so we could remotely log in over the ppp connection at least).

Three little proggies:
rxvt
ssh
scp

>
> Any idea what I can do? At the bottom of this note are the messages I get
> when I plug an ethernet card in.. I've tried two different cards (3c589
> and 3c574), both give the same error;
>
>
> NETDEV WATCHDOG: eth0: transmit timed out
> eth0: Transmit timed out!
> irq status 0808, rx status 0808, tx status 08, tx free 0808
> diagnostics: fifo 0808 net 0808 ethernet 0808 media 0808
> eth0: command 0x5800 did not complete!

Is this a cardbus card (i.e. 32 bit) or a pcmcia card (16 bit). Only 16 bit
cards work in the iPAQ regaurdless(sp) of OS.

-- 
Edward Muller - edwardam@home.com - edwardam@handhelds.org
Trust the source