RE: [iPAQ] problems after instaling familiar 0.4:

raman,

Familiar is using rxvt instead of xterm.

You should be able to install ftp with 'ipkg install ftp'

sshd is installed as part of the base familiar, but you currently need
to run
  ssh-keygen -f /etc/ssh/ssh_host_key
so that sshd will start on bootup.

Jamey

-----Original Message-----
From: T. V. Raman [mailto:tvraman@almaden.ibm.com]
Sent: Tuesday, June 12, 2001 2:03 PM
To: ipaq@handhelds.org
Subject: [iPAQ] problems after instaling familiar 0.4:

Hi--
I got familiar 0.4
 up and running, and I can bring up the ppp
link between the ipaq and my desktop
, but rlogin isn't on the machine, nor is
ftp, nor xterm, so I'm at a loss as to how to do anything with the
machine
other than connect to it with minicom; I also can't find any sort of
file
transfer programs on the ipaq (I thought I could install the necessary
pieces so we could remotely log in over the ppp connection at least).

Any idea what I can do? At the bottom of this note are the messages I
get
when I plug an ethernet card in.. I've tried two different cards (3c589
and 3c574), both give the same error;

NETDEV WATCHDOG: eth0: transmit timed out
eth0: Transmit timed out!
  irq status 0808, rx status 0808, tx status 08, tx free 0808
  diagnostics: fifo 0808 net 0808 ethernet 0808 media 0808
eth0: command 0x5800 did not complete!

-- 
Best Regards,
--raman
------------------------------------------------------------
IBM Research: Human Language Technologies
Phone:        1 (408) 927 2608
Fax:        1 (408) 927 3012
Email:        tvraman@us.ibm.com
WWW:      http://www.cs.cornell.edu/home/raman
PGP:          http://emacspeak.sf.net/raman.asc
Snail:        IBM Almaden Research Center,
              650 Harry Road
              San Jose 95120
_______________________________________________
iPAQ mailing list
iPAQ@handhelds.org
http://handhelds.org/mailman/listinfo/ipaq
irc://irc.openprojects.net #ipaq