[iPAQ] wrong BogoMIPS value?

I don't know if this is of any importance, but my boot sequence shows

...
Kernel command line: noinitrd root=/dev/mtdblock3 init=/linuxrc console=ttySA0
Console: colour dummy device 80x30
Calibrating delay loop... 194.15 BogoMIPS
                          ^^^^^^
Memory: 32MB = 32MB total
Memory: 30884KB available (980K code, 255K data, 60K init)
...

but afterwards I get the same value divided by 100
 
[/root]# cat /proc/cpuinfo
Processor : Intel StrongARM-1110 rev 6 (v4l)
BogoMIPS : 1.94
                  ^^^^
Hardware : Compaq Bitsy
Revision : 0200
Serial : 0000000000000016

This is kernel 2.4.2 from familiar v0.3 (jffs2 version)

Is there something wrong or is it intentionally divided by 100?

Albrecht

// Albrecht Gebhardt Tel.: (++43 463) 2700/3118
// Institut fuer Mathematik Fax : (++43 463) 2700/3198
// Universitaet Klagenfurt mailto:albrecht.gebhardt@uni-klu.ac.at
// Universitaetsstr. 65 http://www-stat.uni-klu.ac.at/~agebhard
// A-9020 Klagenfurt, Austria
Received on Sat Mar 31 03:41:43 2001