I believe the instructions say to reboot after loading the bootldr into
flash. It is best to follow this practice to ensure that the bootldr is
indeed written to flash before trouncing other parts of flash (and
making it so that WinCE will no longer boot even though the WinCE
firmware is still in place).
Jamey
>
>
> You should be able to get into the bootloader using the correct
> settings (by pressing SPACE). To all my knowledge it's not necesarry
> to reboot after loading the bootloader.
>
> Cu,
> Goetz.
Received on Wed Mar 28 15:36:30 2001
This archive was generated by hypermail 2.1.8 : Tue May 04 2004 - 09:43:56 EDT