[iPAQ] Stable XModem transfer solution

Hello!
Just thought I could share my results with others maybe having the same
problems as I had getting XModem to run properly under Linux.
I also had this NAK problem and read a posting on the mailinglist about
fast key pressing in minicom which lead me to the assumption that the problem
is the slow start of the transfer.
So I kicked away minicom and did it from the shell using the two trivial
scripts and some minor hackery:

1. Run minicom and get into the bootloader. After that, quit minicom.
2. Run "setipaqtty </dev/ttySx" with "x" the number of your serial port.
3. Now echo the command for starting the download to the iPaq, for example:
  echo "load kernel" > /dev/ttySx
4. ASAP after that call the second script
  startsen <filename>
After successfull transmission you will see the iPaq's messages. After
"verifying ... done" you can stop the script using CTRL-C.

I use two XTerms for that, one prepared with the startsen commandline and the
other for the echo "load XXX" command. This way I can transfer the needed files
absolutely reliably.

Maybe this helps someone...
  nils faerber

-- 
kernel concepts
Engel & Faerber GbR      Tel: +49-271-771091-12
Dreisbachstr. 24         Fax: +49-271-771091-19
D-57250 Netphen          D1 : +49-170-2729106
--