On Sunday 25 March 2007 22:13, Louie B. Role wrote:
> Currently the unit displays the ARM Bootloader, just that. Running hyper
> terminal on the desktop PC, it shows that it is connected (COM1)but the in
> terminal window, there is no boot> just a blank screen with a flashing
> cursor on the top left side.
1) Make sure nothing else is using the com port (eg. ActiveSync)
2) Make sure hyperterminal has the correct settings (115200 bps, 8, N, 1, and
no flow control or handshaking).
3) Try pressing enter a few times to see if the prompt comes up.
Cheers,
Paul
Received on Thu Apr 05 2007 - 03:18:43 EDT
This archive was generated by hypermail 2.2.0 : Thu Apr 05 2007 - 03:19:11 EDT