Re: [iPAQ] iPAQ Help Please!

Afaik, ipaqs won't try to read from SD/MMC/CF as "bootcard", unless
you press a specific button combination.

In my personal opinion, you have some other problem, but ppl here may
know better. :\

Japa

On 6/1/06, John Shaw <jfshaw_at_gmail.com> wrote:
>
> Hey Guys,
>
> I have an ipaq 3835 that has hardly been used and one day when a new SD card
> was put in, it would not recognize the card so I did a soft reset and then
> it just came up with the iPaq Pocket Pc v1.15 boot screen and nothing else.
> The power drained and it won't charge, but stays on when connected to power.
> I have tried all the hard resetting and holding down all sorts of
> combinations on buttons, but no good.
>
> I don't know if this is a bootloader issue or a hardware fault. Could the
> new SD card have ruined something? Do you all think there is anything that
> can be done or have any ideas as to what is wrong?
>
> I would be so grateful if someone could help or point me in the right
> direction.
>
> Thank you very much for your time!
>
>
> John
> _______________________________________________
> Open Source Software for Compaq iPAQ Handhelds.
> iPAQ mailing list
> iPAQ_at_handhelds.org
> https://handhelds.org/mailman/listinfo/ipaq
> irc://irc.openprojects.net #ipaq
>
>
>
Received on Thu Jun 01 2006 - 23:44:15 EDT