Re: [iPAQ] Familiar 08 + h3970 + mmc modules

Dne pá 31. prosince 2004 14:57 Gints Polis napsal(a):
> Petr Blaha wrote:
> >Dne čt 30. prosince 2004 11:16 Phil Blundell napsal(a):
> >>On Thu, 2004-12-30 at 09:09 +0100, Petr Blaha wrote:
> >>>Dne čt 30. prosince 2004 00:53 Phil Blundell napsal(a):
> >>>>On Wed, 2004-12-29 at 21:06 +0100, Petr Blaha wrote:
> >>>>>but during booting I can see log until :
> >>>>>
> >>>>>Using
> >>>>>/lib/modules/2.4.19-rmk6-pxa1-hh37/kernel/drivers/mmc/mmc_base.o
> >>>>>[mmc_media.c:434] mmc_media_init
> >>>>>Using
> >>>>>/lib/modules/2.4.19-rmk6-pxa1-hh37/kernel/drivers/mmc/mmc_asic3.o
> >>>>>
> >>>>>and iPAQ freezes every boot.
> >>>>
> >>>>It sounds like mmc_asic3 has somehow ended up being autoloaded. This
> >>>>is not a good idea, and is indeed very likely to lead to problems.
> >>>>
> >>>>I'm fairly sure that the default configuration is not to load that
> >>>>module automatically, though. Have you made any configuration changes
> >>>>yourself?
> >>>>
> >>>>p.
> >>>
> >>>The very first and only think I done is adding file with "mmc_asic3"
> >>>to /etc/modutils/mmc_asic (new file created) and then upgraded modulest
> >>>list by "update-modules".
> >>
> >>Ah, that would certainly cause the driver to be loaded automatically.
> >>This is probably what triggered your problem.
> >>
> >>p.
> >
> >Well, I will let configuration in original state. But at this case I can
> > not access any SD or MMC card. Kernel (on h3970!!) still need mmc_asic3
> > module to handle the card!
>
> Read http://handhelds.org/moin/moin.cgi/FamiliarReleaseNotes
> "MMC/SD card doesn't get recognized on H39xx" part....
>
> Gints

Hi & thanks,

this finally works. I think my wrong way was in adding mmc_asic module instead
h3600_asic module. Following instructions in mentoined ("MMC/SD card doesn't
get recognized on H39xx" part....)article I finished my trouble with MMC
mounting.

Other pending thing is USB-NETWORKING. Have you got any idea?

Cheers Pb
Received on Sun Jan 02 2005 - 06:35:25 EST